-
Any advice on Adding charging port to 2019 Spyder F3 S?
Any suggestions on how a putz can easily install charging ports on my F3 S?
-
Very Active Member
Easiest way? Buy one of these .. https://www.amazon.com/NOCO-GC018-Ad...e%2C95&sr=1-14 and something like this .. https://www.amazon.com/AmazonBasics-...ve%2C97&sr=1-4 Cut off the rings and run the power to the accessory connection under the left side tupperware cover. Connect using spade/bullet ends and simply zip tie the connector to the handlebar. Likely the easiest and cheapest.
Last edited by troop; 01-16-2022 at 09:55 AM.
2022 RT Sea To Sky
--------------------------------
-
Active Member
I did similar to what Troop suggested, but my charger is USB ‘C’ type, with a higher output. I can use my mapping software on my Iphone 12 all day, and still have a charge.
2019 F3 base
Shad saddlebags with Admore led light kit
BajaRon swaybar
Hopnel mini bra
BRP driver's backrest
Madstad windshield
Ultimate floorboards
CanAm Spyder accessories rear shelf with LinQ adapter
-
Very Active Member
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2018 F3 Limited - Intense Red Pearl . . . . . . . . . . . . . . . . . . . . . . . . . . .
-
Very Active Member
I also use the dual USB type, but suggested the female cigarette lighter type + dual USB male adapter for overall versatility
2022 RT Sea To Sky
--------------------------------
-
Very Active Member
2019 F3-S has a user accessory port under the left side inspection cover. Just plug it in there.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|