Two 7JUROCK windscreens for 2010-2022 Spyder RT

[WilcoJunoHotel]

***BOTH ARE SOLD***

Both are clear and have the slight "lip" ("flip" as 7JURCOCk calls it on their website) at the top.

I have a 21" that has about 4000 miles on it and it has some very fine light swirl marks from cleaning - not noticeable unless you get very close.

I also have a 25" that has only 100 miles so it is like new.

$125 for the 25" and $80 for the 21". Shipping to lower 48 is included in either one. Or buy both together for $180 including shipping.

These are about $200 each new with a 2-3 week wait if ordered from 7JUROCK.

PM me if interested.


IMG_20211230_110925467.jpg

25" shown in above photo.

IMG_20211230_111149930.jpg

21" shown in above photo.

[RICZ]

HELPFUL HINT....
When cleaning windshields, use vertical strokes ONLY. That will prevent swirl marks. Never wipe it dry either, apply a cleaner spray first, and/or use a wet cloth. Old all cotton T-shirts with no printing on them are the best for w/s cleaning. Microfiber cloths leave particles.

[scwingman]

Sent you a P M

[nerdybeliever]

I can't PM cause I don't have any posts, but I'm interested if you'd like to PM me.

[Peter Aawen]

I can't PM cause I don't have any posts, but I'm interested if you'd like to PM me.

Now that you've put up your first post nerdy, you should have no hassles sending him that PM!

[FrogmanDave]

I would have already bought the 21" but on the 7JUROCK site they only show windscreens fitting the 2010-2019 RT's. Are you sure this would fit a 2022 RT?

[RICZ]

I would have already bought the 21" but on the 7JUROCK site they only show windscreens fitting the 2010-2019 RT's. Are you sure this would fit a 2022 RT?

I have been purchasing from 7Jurock for decades because they are very accommodating, among other good qualities. Phone them so you will know for certain. Web sites can lie, I have learned.
When I don't see what I want, I call them and they make a custom windshield for me.

[WilcoJunoHotel]

I would have already bought the 21" but on the 7JUROCK site they only show windscreens fitting the 2010-2019 RT's. Are you sure this would fit a 2022 RT?

Yes, if you look at the photos I posted I show it on my 2020 RT.

The only difference is the 2 large vent holes are lower and the 4 mounting holes for the screws are slightly larger.

The vent holes are no issue at all because Can Am uses the same windshield arm as earlier RTs so the holes are already in the windshield arm.

As for the mounting holes, you can buy 4 rubber grommets from Can Am for ~US$60 or go to your local hardware store and buy them for about US$2 or you can go without the rubber grommets and it probably will be OK.

[FrogmanDave]

PM sent

[RICZ]

For attaching the windshield, I went to my local Ace Hardware and bought stainless Allen head screws (the OEM screws could have worked), and white nylon washers for spacers (since the w/s is wider that the supports), and black faucet washers to go under the screw heads. Works and looks great. BTW; That is a custom w/s 7Jurock built to my specs.

DSCN2870.jpg

[WilcoJunoHotel]

The 25" windscreen is now SOLD.

I still have the 21" windscreen for sale.

[FrogmanDave]

Money sent.

[WilcoJunoHotel]

Both windscreens are now SOLD.