I would not recommend Arc LED Daytime Running Light / Fog Light Replacement Kit
If you have a 2021 Spyder F3s I would not recommend the Arc LED Daytime Running Light / Fog Light Replacement Kit for the Can-Am Spyder F3. They can not be mounted as instructed, you can out the washer provided on the 3rd outside bolt, it simply will not fit, after the fog lights are mounted they sit too far back in the housing and they is a gap of space around the lights making then look tacky when the lights are off. if you look at the reviews on the website there isn't one bad review, I tried to leave my 1 start review , but i kept getting an error message, go figure..
C'mon man...where's your American ingenuity? Not up to a challenge? Show us that you can do it and post photos.
Ours is a red, black and chrome 2017 F3 Limited. Bought new in 2/2019. The avatar is my first bike back in 1952, a Simplex Servi-Cycle. Photo taken at the Barber Museum.
"C'mon man!"
...........
Really? The point of a Mod KIT is for it fit properly, work, and have readible and understandable instructions to properly mount as well as all parts to fit!
One has spent good money for the kit, we are NOT the BETA testers!
AJ
Originally Posted by RICZ
C'mon man...where's your American ingenuity? Not up to a challenge? Show us that you can do it and post photos.
Last edited by Peter Aawen; 12-22-2021 at 12:54 AM.
Reason: Removed political comment
2014 RT-S Akrapovic Exhaust & Cat Bypass
Bajaron Sway Bar w/links / Sena SM-10/Garmin 660
Comfort Seat w Adjustable Backrest
Decals by Purple Harley / Magic Strobe
Kuryakyn Black Widow Pegs Rivco Highway Brackets
Rivco Trunk Mounted Double Flag Holder
FOBO / Spyder Cuff / XM Radio w MC Antenna
So 2 things, your spyder is a 2019, and i still see a gap around your light where i can see the mounting bolt, maybe I'm expecting too much from an aftermarket part.
This response would be warranted if i tried to put harley lights on my f3, being that I bought lights that were made for an F3 i shouldnt have to do anything esle but bolt it on as instructed.
Last edited by fullyallamathic; 12-22-2021 at 08:00 AM.
C'mon man...where's your American ingenuity? Not up to a challenge? Show us that you can do it and post photos.
This response would be warranted if i tried to put harley lights on my f3, being that I bought lights that were made for an F3 i shouldnt have to do anything esle but bolt it on as instructed
So 2 things, your spyder is a 2019, and i still see a gap around your light where i can see the mounting bolt, maybe I'm expecting too much from an aftermarket part.
So 2 things, your spyder is a 2019, and i still see a gap around your light where i can see the mounting bolt, maybe I'm expecting too much from an aftermarket part.
Maybe I enjoy a challenge more than most do. Like making a silk purse out of a sow's ear. For over 40 years, I had a machine repair biz and can not count the times I had to improvise to make things proper. BTW, there's an inexpensive shroud that fits in that recess and fills in the blank area. Gotta get it from a dealer. Maybe that's what's missing.
Ours is a red, black and chrome 2017 F3 Limited. Bought new in 2/2019. The avatar is my first bike back in 1952, a Simplex Servi-Cycle. Photo taken at the Barber Museum.
Maybe I enjoy a challenge more than most do. Like making a silk purse out of a sow's ear. For over 40 years, I had a machine repair biz and can not count the times I had to improvise to make things proper. BTW, there's an inexpensive shroud that fits in that recess and fills in the blank area. Gotta get it from a dealer. Maybe that's what's missing.
I get what you're saying, but i didnt pay for a challenge
All I see here is the missing shroud as mentioned in post #11.
Ours is a red, black and chrome 2017 F3 Limited. Bought new in 2/2019. The avatar is my first bike back in 1952, a Simplex Servi-Cycle. Photo taken at the Barber Museum.
@Ricz Do you know what the part # would be for this shroud by any chance?
I can do the OP one better; I have a pair of shrouds that I did not use because I added spacers between the mounting plate and the light bracket in order to extend them more farther out of their hidey holes. Looks better too. He could do that too, instead of complain.
If the OP will PM me, I can arrange to sell him my pair.
C'mon guys, I'm trying to help this guy out. I can't help it that I have lived well beyond my use by date. Us old farts aren't known for being overly patient, you know.
Last edited by RICZ; 12-22-2021 at 04:43 PM.
Ours is a red, black and chrome 2017 F3 Limited. Bought new in 2/2019. The avatar is my first bike back in 1952, a Simplex Servi-Cycle. Photo taken at the Barber Museum.
I can do the OP one better; I have a pair of shrouds that I did not use because I added spacers between the mounting plate and the light bracket in order to extend them more farther out of their hidey holes. Looks better too. He could do that too, instead of complain.
If the OP will PM me, I can arrange to sell him my pair.
C'mon guys, I'm trying to help this guy out. I can't help it that I have lived well beyond my use by date. Us old farts aren't known for being overly patient, you know.
PM me and we'll talk. It's Christmas and I'm feeling generous.
Ours is a red, black and chrome 2017 F3 Limited. Bought new in 2/2019. The avatar is my first bike back in 1952, a Simplex Servi-Cycle. Photo taken at the Barber Museum.