-
Afterburner LED and American Flag install? 2022 RT Sea-2-Sky
I want to install the afterburner leds and the large American Flag LED.. The harnesses for the afterburner lite contains the two prong plug from the afterburner lite on each side...Great.
The American Flag is only two bare wires..and I guess will not receive power and ground from the afterburner harness, not tapped into... The American Flag harness has butt connectors for the bare wires..power and ground.
So I guess direct wiring to either harness will not work..for both pieces..
Is the solution wiring the American Flag by tapping power and ground wire, using a back tail light? What color is power and i guess ground is green?
Anyone done this? 2020 and newer the same? Thanks for any help
-
SpyderLovers Ambassador
What no Directions????
So no directions came or available for the installation?
WOW .....
First thing I do when buying products from the internet or anyone is check out the instructions for installing.
Yes, the green wire is still the negative wire. (97% of the time).
I have now gone to ONLY 'plug and play' Spyder add ons.
Good Luck with Your Mission. ......
ENJOY YOUR LIFE WITH A SPYDER
Ryde with a Friend and be Safe
My Spyder ..... 'Little Blue-Boy'
-
Have not received products yet. Just looking at install vids, that is where i got the info on the install and harnesses.
-
Very Active Member
-
SpyderLovers Ambassador
Originally Posted by Lrogers621
Have not received products yet. Just looking at install vids, that is where i got the info on the install and harnesses.
Okay, so just wait for the package to arrive and go from there. That makes the most sense to me.
Maybe it could be a 'plug and play '.
Wouldn't that be grand? .....
ENJOY YOUR LIFE WITH A SPYDER
Ryde with a Friend and be Safe
My Spyder ..... 'Little Blue-Boy'
-
10.4 guys..will wait and see...I'll be back.
-
What is an afterburner LED? A link to the product would help us help you.
A quick Google search shows 5-6 volt units for rc model jets. That won't work on a 12v system.
Last edited by UtahPete; 11-27-2021 at 06:36 PM.
2014 RTL Platinum
-
-
Originally Posted by Lrogers621
For the flag, tap into the running lights. Probably the license plate bulb will be closest.
2014 RTL Platinum
-
SpyderLovers Ambassador
ENJOY YOUR LIFE WITH A SPYDER
Ryde with a Friend and be Safe
My Spyder ..... 'Little Blue-Boy'
-
Very Active Member
-
Very Active Member
2022 Petrol Metallic RT Limited / 'PYDER'
Peter Pan has struck again!
-
SpyderLovers Sponsor
I put the flag on the license plate light wires.
Joe Meyer
Dealer for the Outlaw/ROLO laser Alignment system
-
Thanks everyone....Received goods today...now need the bike..02.2022
-
Active Member
Here is the link for the afterburnerz. We are forum sponsors. We have these installed on our 20+ RT, they look great.
https://store.valueaccessories.net/R...erburnerz.aspx
When purchasing the LED Flags from us. https://store.valueaccessories.net/L...-AMSpyder.aspx You will pick which bike you have. In this case the 20+ RT. We will include an electrical breakout that will plug in series with one of the afterburnz breakouts for plug and play wiring.
That part is very easy, you just need to get access into the back tail lights which we have a video for.
-
Originally Posted by Little Blue
Yes, the green wire is still the negative wire. (97% of the time)
On the Spyders, BLACK is ground.
GREEN (according to the Service Manual) is "Data Communication between modules using a protocol"....so you definitely don't want to mess with that!
The tail lights and the license plate light use ORANGE for power and BLACK for ground.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|