Afterburner LED and American Flag install? 2022 RT Sea-2-Sky

[Lrogers621]

I want to install the afterburner leds and the large American Flag LED.. The harnesses for the afterburner lite contains the two prong plug from the afterburner lite on each side...Great.

The American Flag is only two bare wires..and I guess will not receive power and ground from the afterburner harness, not tapped into... The American Flag harness has butt connectors for the bare wires..power and ground.

So I guess direct wiring to either harness will not work..for both pieces..

Is the solution wiring the American Flag by tapping power and ground wire, using a back tail light? What color is power and i guess ground is green?

Anyone done this? 2020 and newer the same? Thanks for any help

[Little Blue]

So no directions came or available for the installation?
WOW .....

First thing I do when buying products from the internet or anyone is check out the instructions for installing.

Yes, the green wire is still the negative wire. (97% of the time).

I have now gone to ONLY 'plug and play' Spyder add ons.

Good Luck with Your Mission. ......

[Lrogers621]

Have not received products yet. Just looking at install vids, that is where i got the info on the install and harnesses.

[ARtraveler]

Have not received products yet. Just looking at install vids, that is where i got the info on the install and harnesses.

Give the products time to arrive and hopefully all your questions will be answered. I know, I know, it's hard waiting for the new stuff to be installed to arrive. The anticipation will kill you.

[Little Blue]

Have not received products yet. Just looking at install vids, that is where i got the info on the install and harnesses.

Okay, so just wait for the package to arrive and go from there. That makes the most sense to me.
Maybe it could be a 'plug and play '.
Wouldn't that be grand? .....

[Lrogers621]

10.4 guys..will wait and see...I'll be back.

[UtahPete]

What is an afterburner LED? A link to the product would help us help you.

A quick Google search shows 5-6 volt units for rc model jets. That won't work on a 12v system.

[Lrogers621]

https://www.slingmods.com/canam-spyd...nerz?vehicle=1
https://www.slingmods.com/canam-spyd...0-up?vehicle=1

[UtahPete]

https://www.slingmods.com/canam-spyd...nerz?vehicle=1
https://www.slingmods.com/canam-spyd...0-up?vehicle=1

For the flag, tap into the running lights. Probably the license plate bulb will be closest.

[Little Blue]

https://www.slingmods.com/canam-spyd...nerz?vehicle=1
https://www.slingmods.com/canam-spyd...0-up?vehicle=1

Your choice of items both seem to be the 'Plug and Play'
making for an easy installation.

I love the flag. .......

[Mikey]

I like them both!!!!

[FrogmanDave]

I like them both!!!!

What Mikey said.

[cptjam]

I put the flag on the license plate light wires.

[Lrogers621]

Thanks everyone....Received goods today...now need the bike..02.2022

[rick_w]

Here is the link for the afterburnerz. We are forum sponsors. We have these installed on our 20+ RT, they look great.
https://store.valueaccessories.net/R...erburnerz.aspx

When purchasing the LED Flags from us. https://store.valueaccessories.net/L...-AMSpyder.aspx You will pick which bike you have. In this case the 20+ RT. We will include an electrical breakout that will plug in series with one of the afterburnz breakouts for plug and play wiring.
That part is very easy, you just need to get access into the back tail lights which we have a video for.

[Big Mac]

Yes, the green wire is still the negative wire. (97% of the time)

On the Spyders, BLACK is ground.

GREEN (according to the Service Manual) is "Data Communication between modules using a protocol"....so you definitely don't want to mess with that!

The tail lights and the license plate light use ORANGE for power and BLACK for ground.