-
stripped out oil drain plug.
Has anyone had a dealer to remove a stripped out drain plug? Just asking in case you know what happens. I already have new ones from Lamonster ordered just in case.
Last edited by Peter Aawen; 07-22-2022 at 08:55 PM.
Reason: fr;om & le monster ;-)
-
Very Active Member
Originally Posted by Crackerjack99
Has anyone had a dealer to remove a stripped out drain plug? Just asking in case you know what happens. I already have new ones from Lamonster ordered just in case.
I don't believe a Drain plug ( which is stainless steel ) can be stripped out ..... I'm very sure the Alloy pan / case will strip first. ..... very expensive fix ..... be careful .... PS always give a couple of hard raps to the socket to break the varnish seal hot oil creates .... and ALWAYS set your wrench to Loosen before you put it on ..... good luck ....Mike
Last edited by Peter Aawen; 07-22-2022 at 08:56 PM.
Reason: Fixed quote display
-
Active Member
Better let people know whats stripped out, torx, allen or plug threads in engine case. As your sitting on your Spyder, Torx left side allen Right side.
T.P.
-
Question was, has anyone had a dealer to fix a stripped out torx head, just asking I have heard of some being stripped.
-
Very Active Member
I have stripped out the torx head before. I used an easy out to get the plug out after. Due like BK said make sure and tap the plug a few times before you try and take it out.
My Spyder
-
SpyderLovers Ambassador
Oil Drain Plugs
Just as BK has stated. Put a socket on the plug and hit it. Also make sure your ratchet is set to remove the drain plugs. (ccw). .....
ENJOY YOUR LIFE WITH A SPYDER
Ryde with a Friend and be Safe
My Spyder ..... 'Little Blue-Boy'
-
Very Active Member
So I guess the answer to your question is "no". Or if they have they are too shy to say so. Have you stripped something? Or preparing just in case?
Happy TRAils/NSD
Paul
2012 RT L
AMA 25 years Life Member
TRA
PGR
Rhino Riders Plate #83
Venturers #78
TOI
-
Originally Posted by pegasus1300
So I guess the answer to your question is "no". Or if they have they are too shy to say so. Have you stripped something? Or preparing just in case?
Just in case, heard some stories years past.
-
Very Active Member
In my experience I have found that if you make sure the torx or allen bit is all the way seated in the drain bolt and tapped a couple of times you will get it out without stripping.If you haven't already done so go to your favorite tool outlet buy one (1) torx of the proper size and one(1) 6mm Allen, I like 3/8 drive. Good luck with your oil change go slow and take your time and you should be fine.
Happy TRAils/NSD
Paul
2012 RT L
AMA 25 years Life Member
TRA
PGR
Rhino Riders Plate #83
Venturers #78
TOI
-
-
Thanks for the responses, all good advice.
-
Apparently Gold Plug has folded, the phone is disconnected and e-mails etc... go unanswered. Placed an order and funds were paid...crickets
-
Very Active Member
I've had good success in removing stubborn bolts/screws with this tool:
https://www.amazon.com/TEKTON-2905-8...s%2C233&sr=1-4
The caveat is you MUST use the correct bits (Torx 45 on the left, 6mm Allen on the right) AND when you rap on the tool, you MUST insure it's turning the correct direction.
Good luck (it's really a non-issue IF you use the correct tool for the job).
SIGNATURE PIC CURRENTLY UNDER CONSTRUCTION
2016 Toyota Sienna SE - hers
2002 BMW 325i - his
1994 Chevrolet Silverado K1500 Sportside Z71 - whoevers vehicle is in the shop
2009 Harley-Davidson Sportster XL883 Low (Vivid Black) - his
2018 Can-Am Spyder RT Limited - hers
2007 Harley-Davidson Sportster XL883 Low (Pearl White) - hers (SOLD 02/29/20)
2011 Tao Tao 50 - whoevers bike is in the shop
2007 Reinell 186 FNS - the dog's
1995 Fleetwood Flair 27R - EVERYBODY'S !
-
Ozzie Ozzie Ozzie
Last edited by Peter Aawen; 07-21-2022 at 08:43 PM.
2013 RT Ltd Pearl White
Ryde More, Worry Less!
-
Magnetic oil drain plugs
How come all the other threads on this topic got closed?
Hope it's okay to post this link to Lamonster's listing https://www.lamonstergarage.com/show...ic-drain-plug/
2014 RTL Platinum
-
Ozzie Ozzie Ozzie
Last edited by Peter Aawen; 07-21-2022 at 11:47 PM.
2013 RT Ltd Pearl White
Ryde More, Worry Less!
-
Originally Posted by UtahPete
Does anyone know if these Show Chrome magnetic drain plugs are the same as the ones Gold Plug was selling? If so, fans of Gold Plug now have a source.
2014 RTL Platinum
-
Very Active Member
I don’t think they are the same. If they are, you are getting both drain plugs for the price of 1 gold plug. They do look the same though. My gold plugs are 17mm and 15mm heads. For some reason I remember seeing these come out after I had already bought mine in 17.
“Born to Ride......Ride to Live....MOATER ON !
“Current ride: 2017 RT Limited”
-
Here's a link to the Dimple brand that some people here use with good results...
https://drainplugmagnets.com/motorcycles/can-am-spyder/
2014 RTL Platinum
-
Very Active Member
AND there was one brand that would break cause of a thin wall???
2015 Spyder RT Ltd- bUrp - only add the "U", 2010 Honda NT700V-red,2010 Honda NT700V-silver retired @201,111 miles, 1997 Honda PC800, 1996 Honda PC800, Honda CT500, Honda Shadow 500, 1978 Suzuki GS550, 1973 Suzuki TC125, other assorted smaller bikes, Suzuki TM400
-
Originally Posted by Woodaddict
AND there was one brand that would break cause of a thin wall???
BlueKnight911 (Mike) said in another thread that he thought he remembered Dimple brand having that issue. But that was followed up by several responses from people who reported having good results with Dimple.
2014 RTL Platinum
-
Very Active Member
I have the show chrome ones that Lamonster sells.
My only complaint is that "I" think one of the brass washers are too small. At least in the kit that I got.
It could have been a packaging issue from show chrome's supplier.
-
Very Active Member
Why does no one mention being sure to use a torque wrench when re-installing oil drain plugs? The proper torque is WAY lower than what most people put on these fasteners, leading to stripped plugs the next time...
2020 RT Limited Deep Marsala Chrome
-
Ozzie Ozzie Ozzie
Originally Posted by Jetfixer
Why does no one mention being sure to use a torque wrench when re-installing oil drain plugs? The proper torque is WAY lower than what most people put on these fasteners, leading to stripped plugs the next time...
Quote below from one of the other threads ( https://www.spyderlovers.com/forums/...00#post1639000 ) on this subject:
Originally Posted by BajaRon
I cringe when people use a torque wrench on drain plugs. A lot of reasons not to. The 2 most compelling are, 1- It's not necessary. 2- It often produces more problems than it solves for drain plugs (Stripped). Don't get me wrong, For lug nuts, head bolts and other high torque, high stress fittings I am a dedicated torque wrench user. I just don't feel the torque wrench is a universal solution.
The drain plugs come from the factory too tight. They don't need to be all that tight. How often to you hear of a drain plug falling out? (Extremely Rare) How often do you hear of one stripped? (Constantly) People feel that if tight enough is good, tighter is better (as they visualize their drain plugs falling out as they are running down the highway). It's just not reality. And can cause a lot of grief.
I use a Stubby ratchet (I like the articulating kind. But any 3/8" will do nicely) I grip near the head. This gives me a very good feel of what is happening. I just snug the drain plug. Works every time and is no big deal getting it off at the next service. The heat cycles your engine goes through to the next service will work to tighten the plug even more. The machining on these connections are very precise. They won't leak and there is virtually no pressure on that connection. You'll be fine and very happy the next time around. I'm still using the original drain plugs on my 2008 GS.
Next, recommended torque on these plugs is in Inch Pounds. And a low value at that. A torque wrench becomes more and more inaccurate as you move above or below 80% of it's rated range. Not to mention dropping, hard bumping, or storing the wrench at other than the prescribed setting can greatly reduce accuracy. How often do you accurately calibrate your torque wrench? Are you sure it is giving you an accurate reading? At higher values, this is not all the critical. But at values our drain plugs indicate, it is critical.
You have no feeling with a torque wrench. You can easily strip a fitting with no warning. Not so with a stubby ratchet gripped near the head.
I know that for many, a torque setting gives a warm, fuzzy feeling of confidence. But in my opinion, it is safer to trust the very sensitive nerves in your hand for lower torque values.
It's your ride. You should wrench it the way you think best. Just my 2 cents after hearing horror stories on a weekly basis.
2013 RT Ltd Pearl White
Ryde More, Worry Less!
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|