Anyone else experiencing this Sprocket Noise or problem?

[JohnnyH]

I bought a new 2020 F3-T and it has a lot of noise at 45 MPH. I took the bike in for the 1000 mile inspection and told the service manager about the noise. Got a call from them today that the noise was caused by the sprocket that has been redesigned and BRP is aware of this problem but so far no cure for this has been made.
Anyone else experiencing this noise or problem?
I guess I will just have to live with the noise for now. After being a mechanic for 40 years in the oil field I thought it was from the drive belt harmonics.

[Hekarwi]

I have a 2021 F3L and have the same thing. Mine is at 48 mph. Up to 48 is ok and once I hit 50 it goes away.

[ButterSmooth]

Not wanting to hassle with the dealer and BRP, I just bought the pulley from cheap cycle parts, got some moly assembly paste, and swapped the part. The sound is gone. You will be able to find in the forum posts that BRP has replaced some under warranty. Good luck.

Product Unit Price Qty Total
Screw-Hex. Flange DIN.6921 S.Grip Item #250001017 $10.99 1 $10.99
Sprocket 28 Teeth Item #705503239 $114.99 1 $114.99

[RickWB]

Not wanting to hassle with the dealer and BRP, I just bought the pulley from cheap cycle parts, got some moly assembly paste, and swapped the part. The sound is gone. You will be able to find in the forum posts that BRP has replaced some under warranty. Good luck.

Product Unit Price Qty Total
Screw-Hex. Flange DIN.6921 S.Grip Item #250001017 $10.99 1 $10.99
Sprocket 28 Teeth Item #705503239 $114.99 1 $114.99

++++++++++++

The folks that got the pulley replaced under warranty are fortunate, as I was told at my first service last month, that the pulley was an ‘upgrade’, and not a warranty issue.

[Ryan12]

I have a 2020 RT and the sprocket was replaced under warranty. The TSB states if customer complaines then they will warranty parts ans labor. They even replaced bolt also. But my noise is even worse than before. I looked it over and noticed a white pully and the belt is ridding on the oubd side. MM states in BOLD not to have belt ride edges and shows a picture of it in center of pulley. I will be taking it back to dealer with pics and copy of MM i belive pg 121.

[Motogordo]

Oct.23, 2021

I have the 2021 Spyder F3ltd and the same problem. Mine starts around 47 and goes through 50.. I will have the dealer check it again when I have my 3,000 mile service.