Results 1 to 4 of 4
  1. #1
    Active Member
    Join Date
    Feb 2021
    Location
    Tewksbury Ma
    Posts
    36
    Spyder Garage
    0

    Default OEM heated grips AND fog lamps failed on 2015 F3s - Please help

    I have a 2015 F3S and the OEM heated grips AND fog lamps quit. They were on one day and the next day would not go on.
    I have checked all the fuses visually AND with a meter - all good.
    I have changed the shedder relay with 3 other same new relays.
    I have swapped the Accessory lights relay with my headlamp relay.
    Everything else on this bike works perfectly including the headlights, horn, and all controls.
    I took off ALL the plastics and checked the fog lamp bulbs - all good.
    The 2 switches that have to be pushed to turn on the heated grips and the fog lamps BOTH LIGHT up when depressed/turned on.
    All wires look good under the switches.
    Can anyone shed any light on this problem or if it is both the switches somehow, then how do I get the plastic they are mounted on removed to change them?20210905_112353.jpg
    Last edited by Peter Aawen; 09-30-2021 at 05:44 PM. Reason: Not a 'How To:' DIY thread, but a 'How can I fix?' question

  2. #2
    Very Active Member JKMSPYDER's Avatar
    Join Date
    Dec 2012
    Location
    Murphy, NC
    Posts
    1,392
    Spyder Garage
    1

    Default

    Have you checked your manual to see if the heated grips and fog lights are on the same circuit? If so maybe they share some wiring that has chafed of broken?
    2020 F3 Ltd

    Spyderpops Bumpskid
    Spyderpops Brake/Run/Turn Signal LED's
    Lamonster Garage LED Fog Lights and Headlights
    2013 ST-S retired 1/9/16 at 25,061 miles
    2015 F3S sold at 77,565 miles.
    2015 F3-S , BajaRon Plugs Can-Am Red

  3. #3
    Active Member
    Join Date
    Feb 2021
    Location
    Tewksbury Ma
    Posts
    36
    Spyder Garage
    0

    Default

    I don't have a manual. Spoke to the dealership today and they said it may be a broken wire. But they cannot get it in for a month!

  4. #4
    Active Member
    Join Date
    Jan 2019
    Location
    Kentucky
    Posts
    95
    Spyder Garage
    0

    Default

    You should purchase a Manual. They have simple line drawing wiring diagrams that a labeled with the wiring color codes. I use a Midwest Manual.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •