-
Very Active Member
Foam hand grips - do they work with heated grips?
Will foam hand grips cause a problem with the heated grips on my 2018 RT Limited? Will they allow the heat to pass through or will they get sticky?
Greg Kamer
"It's better to be not riding and wishing you were than be riding and wishing you weren't."
USAF, 20 years, retired
Sheriff's Office, 23 years, retired
2018 Can Am Spyder RT-Limited
-
I got foam grips from canamspyderaccessories.com for my 2021 RT. He claims they are slightly thinner (video here) and work better than thicker grips.
https://www.youtube.com/watch?v=zMmyhYa6mnY
They work well for me with either the low or high heat. They have not become sticky and after several minutes I can feel the heat through my gloves.
-
Very Active Member
Greg, I got the ones from Lamonster and they work great with the heaters on. In fact high is too high most of the time. I've thought about doubling them. Neither were the brands mentioned above.
Last edited by ARtraveler; 09-21-2021 at 06:15 PM.
-
Very Active Member
I'm sure they will .... I made my own from closed cell neoprene foam ... like what wet suits are made of .... they are pretty thick and the heat comes thru ..... Mike
-
Very Active Member
I just replaced my worn out Grip Puppies with new ones Sunday. Low heat setting is marginal for heat and the high setting is low setting with out the Grip Puppies.
New to Sue and I
2021, LTD, Asphalt Gray, 22,000 miles
Gone but not forgotten
RTS 2011 SM5, 95,000 miles
-
Active Member
Can’t remember the brand of the foam grips I put on but heat comes through admirably well.
The foam adds very good comfort for my tender hands.
I have put foam grips on all of my past motorcycles…it was usually the first accessory to be put on.
2021 RT Ltd, Marsala Red/Black, Dark
New course heading Mr Sulu: 2nd star to the right and straight on til morning...
-
Very Active Member
Yes, they absolutely work with heated grips, at least mine from Tricled do. No, they don't get sticky, not in 6 1/2 years and 71.7K miles. Use hand sanitizer to easily install them.
Artillery lends dignity to what would
otherwise be a vulgar brawl.
******************************
Cognac 2014 RT-S
-
-
Very Active Member
The heat comes thru pretty good on my Grab On covers. This company .. https://www.shop.originalbeemerbuddi...B-CC-SS_c7.htm makes a "lite" version that is slightly thinner. I used those on a Triumph 800 Tiger with heated grips and they also worked well. Have to specify "Lites" when ordering.
2022 RT Sea To Sky
--------------------------------
-
Very Active Member
Sounds good, thanks for all the input guys.
Greg Kamer
"It's better to be not riding and wishing you were than be riding and wishing you weren't."
USAF, 20 years, retired
Sheriff's Office, 23 years, retired
2018 Can Am Spyder RT-Limited
-
I have a set of Grip Puppies on my 2020RTL. Easy to install and work well with heated grips.
https://grip-puppy.com/
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|