-
I just jacked up the rear of the bike and laid down next to it (not an easy task these days) and slowly spun the rear tire around, first looking for anything caught in the rear sprocket then checking the same on the belt, both tooth side and other. Nothing. I guess the shop will have to figure this out unless I happen to have a rock stuck in the front sprocket (I'm no longer equipped to remove that many body panels).
I appreciate all the help, guys. This is baffling although I'm sure someone who knows these bikes in and out will take about 10 minutes to say, "there's yer problem".
-
Active Member
Woodaddict in note #20 mentioned Dyno Beads clumping. I had that and it was caused by the MOISTURE from my air compressor air mixing with the dust in side the tire to clump with the Beads. Didn't know they were clumping till I wore the tire out. So I guess they still work. Just wanted to share that.
-
I'll echo what Peter said about beads not always being enough. I replaced my tires with the new Quatrac's and put the standard 2 oz front, 3 oz rear Centramatic bead kit you can get on Amazon. I found that my right front wheel was shaking most of the time. Seems like sometimes the beads worked but other times they did not and was inconsistent. I supposed I could have just tried adding more beads but I decided to remove the beads and re-balance with weights. Now it's smooth as silk!
By the way, Marc Parnes sells a nice balance kit specifically for the Spyder. http://www.marcparnes.com/Can-Am_Spy...l_Balancer.htm
Oh and also, these new Quatrac's are fantastic. Tremendous grip on curves! I also noticed that the Spyder is less squirrel-y on gravel roads than the OEM Kendas.
My Mods:
Elka Stage 5 rear shock with spring preload adjust
Monster Stage 2 ECU
Pedal Commander
RLS cat delete
Baja Ron sway bar
Baker Air Wings upper and lower
Viking saddle bags
Third pegs
Vredestein tires front and rear
Mad Stad windshield
X-creen windshield deflector
Front and rear drive cam
Garmin Zumo XT
Heated gear wiring
Lamonster LED headlights
Lamonster LED foglights
Lamonster frame mount cupholder
BRP heated handgrips
Lamonster drivers backrest
BRP passenger backrest
Lidlock handlebar end helmet locks
Barkbusters Storm handguards
-
Just got back from the dealer. They dismounted the tires, removed the beads, remounted the tires and balanced everything. Smooth like it should be. They said another couple ounces of beads probably would have taken care of things but I'd rather the tires be balanced the "right" way.
Thanks for everyone's assistance, posts, etc.
-
Interesting Monk, makes me wonder about the beads. I'm tempted with the Ride-On product.
-
Bill---I think I just didn't have enough beads.
-
SpyderLovers Ambassador
RT Spyder
Hey Monk, what year and model is the Spyder.
ENJOY YOUR LIFE WITH A SPYDER
Ryde with a Friend and be Safe
My Spyder ..... 'Little Blue-Boy'
-
Gonna miss you around here.
-
Originally Posted by Little Blue
Hey Monk, what year and model is the Spyder.
2021 RT
Originally Posted by bikerbillone
Gonna miss you around here.
You trying to get rid of me, Bill? I hadn't planned on going anywhere. I just can't ride much anymore.
-
Oh golly gee whiz, not at all my friend, just thinking u might lose interest. So will still look for your comments.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|