Oem replacement found at https://www.cheapcycleparts.com/ with opportunity available by all means upgrade with some lighting was most impressed with SpyderPops led skid 74701D9A-B34E-412B-98B3-FCE5648B02ED.jpeg better than fog lights alone & WIDE (can identify the trash/debris along a curb {hopefully no nails})
2013 STL SE5 BLACK CURRANT
SpyderPop's: LED bumpskid
SmoothSpyder: dualmode back rest
T r * * LED:foam grip covers, Tricrings, FenderZ,
brake light strips, wide vue mirrors
Rivico SOMA modulation brake leds
sawblade mowhalk fender accents
minispyder dash toy
Lid lox
KradelLock
Pakitrack
GENSSI ELITE LED H4 headlights
FLO (Frunk Lid Organizer)
BRP fog lights, trailer hitch
SENA 20S EVO
One good scrape and you'll learn. Spyderpops skid plate was a super easy install. However, the LED lights started going out shortly after install. Don't know why, but their after-market turn signal LEDs began going out also.
No, the skid plate will not serve as a belt guard. Belt guards are actually affixed to the swing arm which is considerably aft of where the skid plate ends. The skid plate actually replaces the smaller BRP OEM panel that us under and slightly aft of the nose of the Spyder. The skid plate is designed to protect the underside of the nose of the Spyder and the underbody immediately aft of the nose.
Artillery lends dignity to what would
otherwise be a vulgar brawl.
****************************** Cognac 2014 RT-S
Looking to purchase a Skid Plate - recommendations?
Reply With Quote
!
was most impressed with SpyderPops led skid 
(can identify the trash/debris along a curb {hopefully no nails})
a few times judging by the gouges in it.
Originally Posted by sandylolee
