-
Very Active Member
Messed up frunk/seat lock assembly
After 10 years my lock assembly is broken. Ignition still works, but the lock no longer opens seat or frunk. I have resolved the eat latch issue by routing the existing cable to my glovebox. I did cut the cable about 2 feet from latch. Works good. After this repair I tried to unlock the frunk, no go. Since I have a 2011 RTS, I have the electric switch to unlock frunk. Hopefully some evening this week I will run the cable for the latch out by the oil tank. Bruce
New to Sue and I
2021, LTD, Asphalt Gray, 22,000 miles
Gone but not forgotten
RTS 2011 SM5, 95,000 miles
-
Very Active Member
Originally Posted by safecracker
After 10 years my lock assembly is broken. Ignition still works, but the lock no longer opens seat or frunk. I have resolved the eat latch issue by routing the existing cable to my glovebox. I did cut the cable about 2 feet from latch. Works good. After this repair I tried to unlock the frunk, no go. Since I have a 2011 RTS, I have the electric switch to unlock frunk. Hopefully some evening this week I will run the cable for the latch out by the oil tank. Bruce
Bruce - doing a separate mechanical cable re-lease is your best least expensive option. And the wisest, having the ignition switch do them is a failure waiting to happen .... I have done dozens as a Vendor. ..... A few folks have posted various pics and vids on how to .... Mike
-
Very Active Member
Mike, thanks for the advice. I plan on doing just that this week. Bruce
New to Sue and I
2021, LTD, Asphalt Gray, 22,000 miles
Gone but not forgotten
RTS 2011 SM5, 95,000 miles
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|