Results 1 to 12 of 12
  1. #1
    Active Member sandylolee's Avatar
    Join Date
    Oct 2019
    Location
    NC
    Posts
    58
    Spyder Garage
    1

    Default Front latch not latching! Can I adjust it?

    2019 rtl front latch not latching. How do I adjust same? Used some silicone spray on same but that didn’t work.
    2019 Rt limited chrome , Phoenix orange

  2. #2
    Very Active Member JayBros's Avatar
    Join Date
    Jul 2014
    Location
    Mint Hill, NC
    Posts
    5,871
    Spyder Garage
    0

    Default

    Are you saying the latch does not latch when you attempt to close the frunk lid or the latch will not click into the closed position when you push down on it with the frunk lid open? If the former, check that the frunk tub gasket is fully seated all the way around. It is not unusual to pull part of the gasket loose when removing a bulky bag from the frunk. If the latter, when you push the ignition key fully down into the lock and turn it CCW can you hear the cable moving in its housing? You should be able to push down on the latch with the frunk lid open and see it click into the latched position and then when you press down on the ignition key and turn it CCW the latch should snap open as there is a spring in the system to push it open.
    Artillery lends dignity to what would
    otherwise be a vulgar brawl.
    ******************************
    Cognac 2014 RT-S

  3. #3
    Active Member sandylolee's Avatar
    Join Date
    Oct 2019
    Location
    NC
    Posts
    58
    Spyder Garage
    1

    Default

    JayBros I have checked the gasket it seems to be fully seated. and It opens just fine.
    2019 Rt limited chrome , Phoenix orange

  4. #4
    Very Active Member RICZ's Avatar
    Join Date
    Feb 2019
    Location
    Portland, Oregon
    Posts
    2,735
    Spyder Garage
    1

    Default

    Yes, it can be adjusted. I had to adjust mine. I added an Ace Hardware #10 spring to the pin in the lid, which helps it pop up easier.
    Ours is a red, black and chrome 2017 F3 Limited. Bought new in 2/2019. The avatar is my first bike back in 1952, a Simplex Servi-Cycle. Photo taken at the Barber Museum.
    2017 F3 Limited , Red, Black & Chrome

  5. #5
    Very Active Member JayBros's Avatar
    Join Date
    Jul 2014
    Location
    Mint Hill, NC
    Posts
    5,871
    Spyder Garage
    0

    Default

    Quote Originally Posted by sandylolee View Post
    JayBros I have checked the gasket it seems to be fully seated. and It opens just fine.
    OK, with the frunk lid open what happens when you push down on the latch, will in not stay down in the locked position? I'm sorry, if it won't I don't know how to adjust it.
    Artillery lends dignity to what would
    otherwise be a vulgar brawl.
    ******************************
    Cognac 2014 RT-S

  6. #6
    Very Active Member EdMat's Avatar
    Join Date
    Apr 2019
    Location
    Clinton, MS
    Posts
    1,566
    Spyder Garage
    1

    Default

    You can adjust the latch for height. If you remove the tupperware around the headlights it's pretty obvious how to adjust it up or down as the latch bracket is slightly slotted allowing it to be moved up or down.
    2019 RT Limited , Phoenix Orange

  7. #7
    Very Active Member JayBros's Avatar
    Join Date
    Jul 2014
    Location
    Mint Hill, NC
    Posts
    5,871
    Spyder Garage
    0

    Default

    Thanks, now I know.
    Artillery lends dignity to what would
    otherwise be a vulgar brawl.
    ******************************
    Cognac 2014 RT-S

  8. #8
    Active Member sandylolee's Avatar
    Join Date
    Oct 2019
    Location
    NC
    Posts
    58
    Spyder Garage
    1

    Default

    Thanks EdMat I’ll check that out.
    2019 Rt limited chrome , Phoenix orange

  9. #9
    Active Member sandylolee's Avatar
    Join Date
    Oct 2019
    Location
    NC
    Posts
    58
    Spyder Garage
    1

    Default

    The latch works good.JayBros
    2019 Rt limited chrome , Phoenix orange

  10. #10
    Very Active Member JayBros's Avatar
    Join Date
    Jul 2014
    Location
    Mint Hill, NC
    Posts
    5,871
    Spyder Garage
    0

    Default

    Then I guess it's worth removing a little Tupperware to adjust the latch per EdMat's instructions. Just be certain to test the adjusted latch multiple times before reinstalling the Tupperware. Removing the Tupperware is in your operator's guide in the section on replacing headlights.
    Artillery lends dignity to what would
    otherwise be a vulgar brawl.
    ******************************
    Cognac 2014 RT-S

  11. #11
    Active Member sandylolee's Avatar
    Join Date
    Oct 2019
    Location
    NC
    Posts
    58
    Spyder Garage
    1

    Default

    Got it fixed. I was able to adjust the latch up a little bit. Latches properly now. Thanks for all your help and info.
    2019 Rt limited chrome , Phoenix orange

  12. #12
    Very Active Member JayBros's Avatar
    Join Date
    Jul 2014
    Location
    Mint Hill, NC
    Posts
    5,871
    Spyder Garage
    0

    Default

    Glad you got it fixed. This web site has a wealth of good information. The next time I have to pull off that facia beneath the windshield I'll have to look at the latch adjustability.
    Artillery lends dignity to what would
    otherwise be a vulgar brawl.
    ******************************
    Cognac 2014 RT-S

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •