Results 1 to 21 of 21
  1. #1
    Active Member Spyder Hawk's Avatar
    Join Date
    Feb 2015
    Location
    California
    Posts
    121
    Spyder Garage
    0

    Default Windshield pro's and con's

    Hey all the F3 owners out there. How many of you have...
    1. Replaced your stock windshield with a similar size?
    2. What maker did you go with?
    3. Did it have the Euroflip on the top of the windshield?
    4. If it didn't how much did wind noise increase or decrease?
    5. Did it have the cutouts in it?

    Trying to find out if it is worth it to replace the windshield with the same size but no vent holes. It is down to Gustafsson Windscreens and CalSci. I am leaning towards Gustafsson because they will make a repica of the factory windshield without the vent holes. I just don't know if it is going to cause more turbulence and noise or not. I would think that removing the two vent holes would decrease to wind noise.

  2. #2
    Very Active Member ARtraveler's Avatar
    Join Date
    Feb 2010
    Location
    Valley Springs, AR
    Posts
    41,274
    Spyder Garage
    8

    Default

    Have 2 F3L's. One 19 and one 20. We still have the stock windshields w/ vent holes attached. Did one long trip. Have not had any issues and do not feel like we need a change.

    Currently Owned: 2019 F3 Limited, 2020 F3 Limited: SOLD BOTH LIMITEDS in October of 2023.

    Previously : 2008 GS-SM5 (silver), 2009 RS-SE5 (red), 2010 RT-S Premier Editon #474 (black) 2011 RT A&C SE5 (magnesium) 2014 RTS-SE6 (yellow)

    MY FINAL TALLY: 7 Spyders, 15 years, 205,500 miles

    IT HAS BEEN A LONG, WONDERFUL, AND FUN RIDE.
    2020 F3L , Magma Red

  3. #3
    Member
    Join Date
    Jun 2021
    Location
    tn
    Posts
    8
    Spyder Garage
    0

    Default

    Ive only had my F3 a couple of weeks but felt like changing the windshield was the first thing I needed to do after riding at highway speeds with the short factory one. I ended up going with the F4 Customs 25 inch windshield with the air wings. They come with or without vent or with lover style closeable vent. It made a huge difference but I still get some buffeting above 65 mph. Still dramatically better than the factory. Good luck!

  4. #4
    Very Active Member
    Join Date
    Jun 2016
    Location
    indpls in
    Posts
    851
    Spyder Garage
    0

    Default

    did the freedom from lamonster tinted 19 inch love it

  5. #5
    Very Active Member RICZ's Avatar
    Join Date
    Feb 2019
    Location
    Portland, Oregon
    Posts
    2,735
    Spyder Garage
    1

    Default

    Don't pull the trigger until you check into 7Jurock, my go-to for many years and many bikes. Cost $100s less than most and it's a quality product. My summer windshield is a 17" with the flip. It lets some breeze get on me, but nothing annoying. My winter w/s is a 18" that's 9" wider that stock, yet I can use the stock brackets. It is well below my eye level, yet it affords me great protection from the wind. It too has a flip.
    7Jurock measures their w/s on the plastic, vertically top to bottom along the centerline. The 18" was a custom built to my specs, yet they charged me no more than a stock one of the same height - $170 shipped. Here's a photo of it. Sorry about the upside down, I don't know how to fix it.

    20201028_163157.jpg
    Ours is a red, black and chrome 2017 F3 Limited. Bought new in 2/2019. The avatar is my first bike back in 1952, a Simplex Servi-Cycle. Photo taken at the Barber Museum.
    2017 F3 Limited , Red, Black & Chrome

  6. #6
    Active Member VitoNam's Avatar
    Join Date
    Nov 2018
    Location
    NW Minnesota
    Posts
    87
    Spyder Garage
    0

    Default

    2018 F3L here:

    I replaced stock shield with Lamonster's 15". Then I added the adjustable MRA X-Creen Tour Spoiler Blade. This combo works very well for me.

    No added turbulence to speak of.

    I wear modular helmet and ear plugs so I can't comment on wind noise.

    I think your body type/structure is going to affect how any windshield will work for you.

  7. #7
    Member
    Join Date
    Aug 2020
    Location
    NM
    Posts
    26
    Spyder Garage
    0

    Default

    I'm the oddball here, but I replaced an aftermarket Madstad windshield with the BRP Blue Ridge Windshield on my F3S. I like the look of the Blue Ridge windshield and it does fine with my height. I'm 5'8".

  8. #8
    Active Member ChicagoSpyder's Avatar
    Join Date
    Apr 2019
    Location
    Chicago
    Posts
    251
    Spyder Garage
    1

    Default

    I have a Lamonster 15" Freedom it has a slight flip, it's great in warm weather. Sometimes I think about getting an F4 Customs 21" with vents for more protection on cross country trips, but I think 21" might be to high for me @5'-8".

    https://www.lamonstergarage.com/free...eld-lamonster/
    2018 F3 Limited , Black/Chrome

  9. #9
    Active Member ChicagoSpyder's Avatar
    Join Date
    Apr 2019
    Location
    Chicago
    Posts
    251
    Spyder Garage
    1

    Default

    Quote Originally Posted by RICZ View Post
    Don't pull the trigger until you check into 7Jurock, my go-to for many years and many bikes. Cost $100s less than most and it's a quality product. My summer windshield is a 17" with the flip. It lets some breeze get on me, but nothing annoying. My winter w/s is a 18" that's 9" wider that stock, yet I can use the stock brackets. It is well below my eye level, yet it affords me great protection from the wind. It too has a flip.
    7Jurock measures their w/s on the plastic, vertically top to bottom along the centerline. The 18" was a custom built to my specs, yet they charged me no more than a stock one of the same height - $170 shipped. Here's a photo of it. Sorry about the upside down, I don't know how to fix it.

    20201028_163157.jpg
    Just checked out there website, thanks for the info on 7Jurock! If you don't mind, could you please post your height?
    2018 F3 Limited , Black/Chrome

  10. #10
    Very Active Member RICZ's Avatar
    Join Date
    Feb 2019
    Location
    Portland, Oregon
    Posts
    2,735
    Spyder Garage
    1

    Default

    Quote Originally Posted by ChicagoSpyder View Post
    Just checked out there website, thanks for the info on 7Jurock! If you don't mind, could you please post your height?
    I'm 5'-10" and shrinking. Don't go by my w/s heights, establish your own. Clip or tape a piece of rectangular cardboard to the top of your w/s and go for a ride. Raise and lower the cardboard until the top is at the desired height, then measure.
    Ours is a red, black and chrome 2017 F3 Limited. Bought new in 2/2019. The avatar is my first bike back in 1952, a Simplex Servi-Cycle. Photo taken at the Barber Museum.
    2017 F3 Limited , Red, Black & Chrome

  11. #11
    Very Active Member blacklightning's Avatar
    Join Date
    May 2013
    Location
    Apex, N.C.
    Posts
    3,231
    Spyder Garage
    1

    Default

    I have gone through about 5 different windshields for my F3T. For the most wind protection, I liked the Value Accessories shield. It gave me extra height and extra width. I later came across a F4-21" shield. It was nice, but did not have the added width, without spending the extra funds for the wings. It was the same height as the one from Value accessories and really didn't add anything to make it stand out. I also picked up one off ebay that was pretty nice, but really just a cheaper copy of the F4. I have decided to stay with the stock shield for summer months and I cut 3" off the Value accessories for the winter months. The F4 is a backup for the winter, but not quite as good since it gives up about 4" in total width.
    2021 RTL , brake pedal from "Web Boards" chalk white

  12. #12
    Active Member
    Join Date
    May 2019
    Location
    Mt. Juliet, TN
    Posts
    93
    Spyder Garage
    0

    Default

    Had Dealer replace stock w/s on my 2020 F3-T at time of purchase with Can Am Big Boy. Worked well for me and I really like the look. Wife said she gets more wind sometimes than she likes so I changed (see below). Will sell Big Boy including mounts. PM if interested. Product # 219400596. Perfect condition.

    Installed 7Jurock w/ flip at top, 21", no tint, no cut out or vents. Again, works well for me, wife is still deciding her opinion (figures).

    Glenn Mt Juliet, TN

  13. #13
    Very Active Member RICZ's Avatar
    Join Date
    Feb 2019
    Location
    Portland, Oregon
    Posts
    2,735
    Spyder Garage
    1

    Default

    Regarding what wives, or any passenger feels, my wife says she is in a calm when the 18" winter windshield is on. That's the 9" wider custom that 7Jurock made to my design. It has a flip, as do all my windshields past and present. Note that it uses the stock brackets - nice!

    DSCN2871.jpg
    Ours is a red, black and chrome 2017 F3 Limited. Bought new in 2/2019. The avatar is my first bike back in 1952, a Simplex Servi-Cycle. Photo taken at the Barber Museum.
    2017 F3 Limited , Red, Black & Chrome

  14. #14
    Very Active Member Haze's Avatar
    Join Date
    Oct 2015
    Location
    Lynden, WA
    Posts
    1,209
    Spyder Garage
    0

    Default

    Ric
    Is the same windshield used in both pictures shown in this post?
    In the first pic the windshield looks almost flat or square along the top.
    In the second pic the windshield looks much more rounded at the top.
    Thanks, David C.

    7Jurok Windshield.jpg 7Jurok Windshield 2.jpg
    David C
    2016 F3T
    DIY Garage Door Opener & GPS Mount
    Battery tender cable
    Rear IPS Pack Rack



  15. #15
    Very Active Member RICZ's Avatar
    Join Date
    Feb 2019
    Location
    Portland, Oregon
    Posts
    2,735
    Spyder Garage
    1

    Default

    Quote Originally Posted by Haze View Post
    Ric
    Is the same windshield used in both pictures shown in this post?
    In the first pic the windshield looks almost flat or square along the top.
    In the second pic the windshield looks much more rounded at the top.
    Thanks, David C.

    7Jurok Windshield.jpg 7Jurok Windshield 2.jpg
    Same windshield. I just wanted to show another view and hope it posted right side up.
    Ours is a red, black and chrome 2017 F3 Limited. Bought new in 2/2019. The avatar is my first bike back in 1952, a Simplex Servi-Cycle. Photo taken at the Barber Museum.
    2017 F3 Limited , Red, Black & Chrome

  16. #16
    Active Member
    Join Date
    Jan 2021
    Location
    northeast pa.
    Posts
    317
    Spyder Garage
    0

    Default

    i put the 19 inch tinted freedom on mine,, im 5-11 and its just right,, looks great, i can see over it by a few inches,,
    2020 F3 limited, liquid titanium
    grip puppies
    Bajaron sway bar
    lamonster belt dampener
    battery tender
    19 in freedom tinted windshield
    matte black daytona frunk wrap
    Quadtrac 165/60's

  17. #17
    Very Active Member Rattlebars's Avatar
    Join Date
    Mar 2017
    Location
    Girard OH (summer) Greenville SC (winter)
    Posts
    877
    Spyder Garage
    1

    Default

    @72 with agent orange and arthritis, I need LOTS of windshield. I have an f4 no vent 25" to which I added several things to accommodate my disabilities.

    Visit the link in my signature to see details & links. When you get there, click on the image.


    Slingshot.jpg

    moparty-cropped.jpg
    Attached Images Attached Images
    to see my 2016 F3-T and many how to's
    2016 F3-T SE6 Roadster , Extended brake pedal for which I drilled out the brake rod yolk to lower it and added spacers to lift it slightly Black/Grey

  18. #18
    Active Member
    Join Date
    Mar 2019
    Location
    NEBRASKA
    Posts
    433
    Spyder Garage
    1

    Default

    Quick question....bought a standard 25 " f4 custom windshield from a fella...came with 8 flat washers he said go on either side of the 4 hole attachments ....I see no mention of these washers on any install videos ...my windshield has the rubber grommets and metal inserts.....so do I use these washers or not...I see no mention on any f4 custom videos of these washers. Thanks !!
    2012 RTL 14 RTS , Pearl White @ Pearl White

  19. #19
    SpyderLovers Sponsor F4 Customs's Avatar
    Join Date
    Nov 2012
    Location
    Twinsburg, Ohio
    Posts
    697
    Spyder Garage
    0

    Default

    F4 Customs, Inc.
    "The Motorcycle Windshield Folks"
    941-347-7496
    sales@f4customs.com
    <a href='http://www.spyderlovers.com/adserver/www/delivery/ck.php?zoneid=22' target='_blank'><img src='http://www.spyderlovers.com/adserver/www/delivery/avw.php?zoneid=22&cb=567846784' border='0' alt='' /></a>

  20. #20
    Active Member always young's Avatar
    Join Date
    Oct 2015
    Location
    Melbourne, Fl
    Posts
    96
    Spyder Garage
    0

    Default

    Well.... I have a 2016 F3 Ltd still with the stock screen. One of the first things that I added was the adjustable X-screen (don't buy the cheap Chinese single mount version, a POS) I have it adjusted to almost vertical (about 15 deg aft) in front of the stock screen (clamp on version not the screw mount version). The top of it is about 3 1/2" above the lip of the stock screen. My sightline is about 2" above it. I don't like looking through a screen. I can ride with my visor all the way open at 75 MPH without buffeting. The wife never complains about buffeting on the back. Believe me, she would let me know if there was. On the highway I usually have my visor cracked for ventilation and the occasional bug that will get through the slipstream. This setup works for me (5'9") and I've gone 20K miles without ever adjusting it. Just an alternate setup to throw out there for folks to consider. Heading off to the Blue Ridge campground in NC on the 27th for a COG get together. I'll be at Suches Ga in September for another COG event then to the Maggie Valley Spyder one in October as well. Ride safe and enjoy life!
    Life is attitude, be positive!

  21. #21
    Active Member
    Join Date
    Jun 2015
    Location
    Hampton Roads, VA
    Posts
    436
    Spyder Garage
    0

    Default The nose knows

    I'm 6'5" and the stock windshield let the wind smack my helmet around. Got a taller shield. When you sit on the bike the top of the shield should be at your nose (according to many manufacturers). I found a used one on eBay, and all the wind is gone, and I can hear my stereo now.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •