BRP Part Quality is not the best!

[Stangman35]

Went to pick up my rear panel for my 2021 RT Limited that I ordered when i bought the machine , it came in this Saturday. 80 mile round trip only to find the part was defective, A blind person could tell it wasn’t molded right. Iv went thru quality problems with my 19 f3 limited mirror covers falling off and then waiting months to get replacements because the factory was wrapping the covers before the paint was cured and the foam was in printing in the paint.I’ll attach a pic of the rear panel.

[rotax07]

Went to pick up my rear panel for my 2021 RT Limited that I ordered when i bought the machine , it came in this Saturday. 80 mile round trip only to find the part was defective, A blind person could tell it wasn’t molded right. Iv went thru quality problems with my 19 f3 limited mirror covers falling off and then waiting months to get replacements because the factory was wrapping the covers before the paint was cured and the foam was in printing in the paint.I’ll attach a pic of the rear panel.

BRP doesn't make the part, it's their suppliers poor qc.

[Peter Aawen]

BRP doesn't make the part, it's their suppliers poor qc.

AND it's BRP's fault for accepting these shoddy pieces of crap!

There again, maybe they're getting exactly what they specified!




It's a good thing our Spyders/Rykers are such fun to ryde, innit!

[Stangman35]

I called around today and found a dealer in Ohio that had 2 in stock, so I had him pull it out and check to see the if it had both mounts formed and he said it looked fine so hopefully when I get this one delivered to my home in a few days it will be right. Iv also found a couple of spots in different pieces of painted plastic on the new 21 RT that looks like a dirt speck was in the paint. A 30k motorcycle should be flawless.

[old Timer]

Parts are manufactured to the level of quality specified by the ultimate purchaser of the part required for the ultimate product, in this case Can Am.

Can Am in this case apparently has very loose specifications from their vendors.