After Passenger floor boards for an RSS - Recommendations?

[Juejue97]

Hello everyone,

Before anyone says anything yes I did some searching round and come up empty. I'm looking for some passenger floor boards. I'm planning a trip and i know my girlfriend will get tired having her foot on the pegs. I have a 2011 Can am spyder rss. I found these but not sure if they will work.

https://www.speedaddicts.com/motorcy...MaAgGzEALw_wcB


Thn k you in advance

[BLUEKNIGHT911]

Hello everyone,

Before anyone says anything yes I did some searching round and come up empty. I'm looking for some passenger floor boards. I'm planning a trip and i know my girlfriend will get tired having her foot on the pegs. I have a 2011 Can am spyder rss. I found these but not sure if they will work.

https://www.speedaddicts.com/motorcy...MaAgGzEALw_wcB


Thn k you in advance

The problem for you is attaching that board to the RSS bracket on your Spyder. .... BRP has a very different way for their pass Pegs. .... When I made floorboards for my 14 RT ... I removed the rubber covering and made an alumin. plate and attached that directly to the OEM pegs ... I was able to add a bracket to the rear of the board and used an OEM hole/bolt to support the rear of the board. You could do something similar with yours using the metal extension by the rear peg .... good luck .... Mike

[Juejue97]

Thank you very much

[Motorcycledave]

Hello everyone,

Before anyone says anything yes I did some searching round and come up empty. I'm looking for some passenger floor boards. I'm planning a trip and i know my girlfriend will get tired having her foot on the pegs. I have a 2011 Can am spyder rss. I found these but not sure if they will work.

https://www.speedaddicts.com/motorcy...MaAgGzEALw_wcB


Thn k you in advance

Those are very nice passenger floor boards

[Motorcycledave]

Hello everyone,

Before anyone says anything yes I did some searching round and come up empty. I'm looking for some passenger floor boards. I'm planning a trip and i know my girlfriend will get tired having her foot on the pegs. I have a 2011 Can am spyder rss. I found these but not sure if they will work.

https://www.speedaddicts.com/motorcy...MaAgGzEALw_wcB


Thn k you in advance

Here are photos of the RIVCO Floor Boards on my 2008 GS that I still have and ride daily. I am a dealer for Rivco and can save you money
all you have to do is call me 209-887-3283 9:00AM to 8:00PM Pacific time daily.
I always sell for less than everyone on quality name brand items.
Spyder Floor Boards.png

[Motorcycledave]

I have both front drivers & passenger floor boards
plus much much more in accessories I sell to Spyder Lovers DISCOUNT PRICES
Call today 209-887-3283


#1 foot brake installed.jpg
Motorcycle Dave's LOGO #1.jpg