-
Very Active Member
canamspyderaccessories F3 hitch adapter
I'm going to add Pierre's F3/F3S hitch to my F3. His harness comes with a 4 pin flat plug but we have an RT-622 trailer. I haven't been able to find an adapter that will go from 4-pin flat to 4-pin square. Lamont's adapter is the other way around (OEM harness to non-BRP trailer.) Anyone have a lead on the correct adapter?
Trb-- (Roger)
2014 Cognac STL:Ultimate Seat, Nelson Rigg Tail Pack, Nelson Rigg RS/ST Half Cover, TL fender lights, Squared Away Laser Alignment, BajaRon sway bar and links, Akropovic Sport Silencer
2022 White Pearl F3T
Gone but not forgotten: 2019 F3S Special Series Liquid Titanium
Spyder States Visited
-
Active Member
-
Very Active Member
Cut the flat four in two and tape (or heat shrink tube) one half on top of the other. It'll then fit the square four. I haven't done this myself but others here on the forum have.
2014 Copper RTS
Tri-Axis bars, CB, BajaRon sway bar & shock adjusters, SpyderPop's Bumpskid, NBV peg brackets, LED headlights and modulator, Wolo trumpet air horns, trailer hitch, custom trailer harness, high mount turn signals, Custom Dynamics brake light, LED turn signal lights on mirrors, LED strip light for a dash light, garage door opener, LED lights in frunk, trunk, and saddlebags, RAM mounts and cradles for tablet (for GPS) and phone (for music), and Smooth Spyder belt tensioner.
-
Very Active Member
Hey Roger,
I did the cut and tape of the Flat 4 to make a
Square 4 for the hitch on my previous ST.
It worked without a problem.
Good Luck, David C.
David C
2016 F3T
DIY Garage Door Opener & GPS Mount
Battery tender cable
Rear IPS Pack Rack
-
Very Active Member
Check with Lamonster Garage. They sell an adaptor that works.
http://www.lamonstergarage.com/can-a...ter-lamonster/
2020 Chalk, RT Limited, Dark and matching RT622 trailer and BRP hitch. BRP Drivers Backrest, Auxiliary Light, Garmin Zumo XT, GPS Support, RT Rear Panel and Travel Cover. Spyderpops LEDs on fenders, mirrors, saddlebags, top case and RT rear panel. Spyderpops Rock Guard. BajaRon Swaybar, Wolo Bad Boy horn, Freedom Windshield, Elka Shocks.
-
Very Active Member
Originally Posted by Haze
Hey Roger,
I did the cut and tape of the Flat 4 to make a
Square 4 for the hitch on my previous ST.
It worked without a problem.
Good Luck, David C.
Thanks Dave. It never dawned on me to cut the Flat 4. I needed something quick so in the end I bought a trailer kit at Harbor Freight, cut off one of the flat 4's and spliced it into the trailer's wiring. Now that we're back from our trip I have the time to do it "right".
Trb-- (Roger)
2014 Cognac STL:Ultimate Seat, Nelson Rigg Tail Pack, Nelson Rigg RS/ST Half Cover, TL fender lights, Squared Away Laser Alignment, BajaRon sway bar and links, Akropovic Sport Silencer
2022 White Pearl F3T
Gone but not forgotten: 2019 F3S Special Series Liquid Titanium
Spyder States Visited
-
Our best friend has the 4 square on her Spyder and Trailer - and I have the Flat 4 on my Spyder and Vision. I bought a square 4 and flat 4 extension and cut them up to make my own adapter (both ways) - so I can tow her trailer with my stuff - and she can tow my flat 4 with her Spyder if necessary. The wiring of the adapter is sure straight forward.
-----
Joshua
2012 Victory Vision
2016 Spyder F3S
2019 Spyder RT Limited
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|