Any way to mount extra floorboards/pegs on Ryker to aid mounting?

[Quickdraw]

Hello, I'm new here and hoping someone has had this idea and solved it.

My wife has a 2020 Ryker Rally 900 and I put a new seat and saddlebags on it recently. The problem she has now is that she's got short legs so it's difficult for her to get on the trike. I installed floorboards to replace the original foot pegs but they don't go back far enough for her to use to get on the trike. Does anyone know if there's a way to mount some sort of step or footboard directly under the driver's seat? From what I can tell, that part of the trike is a huge piece of steel and not a typical frame you could easily mount a floorboard to.

Thanks.

[Texas Al]

I solved this problem by installing another peg all the way back just on one side and I use it to mount the bike.

[Quickdraw]

Can you upload that photo again? It's not accessible. Thanks. I'm interested in how you did this. Would help the wife tremendously.

[kml354]

I also have short legs and with the three pieces of luggage it can be a pain getting legs over everything.
I plan on mounting 1 Kuryakyn 3597 Motorcycle Foot Control Component: Riot Mini Board Floorboards on the right side of bike. Mounted on side just above the muffler.
Picture coming soon.

[kml354]

That's the same idea I had, going to install soon. The curse of short legs with the Slingmods three piece luggage. Glad to see I'm not the only one.

[braye1960]

Where did you get the extra pegs?

[Raven]

I solved this problem by installing another peg all the way back just on one side and I use it to mount the bike.

I was thinking of doing the same thing.
If you don't mind, how much did it cost?

[Raven]

Just realized this is a three year old post.