Recently my Starter Solenoid shorted out causing my starter to fry. I ordered replacement parts. Unfortunately, I did not take pictures of there the two smaller wires on the solenoid connect to which post on the Solenoid. I was in hopes that my schematic would help determine that. Unfortunately, it does not. Solenoid Picture.jpg Schematic-Solenoid.jpg
can anyone help me with this. I plan on reassembling her today.
Hey Jerry. Are you still working on this? The short answer is that it doesn't matter. This application is different from an auto application. This is just two ends of a DC coil. The wires probably fit easier one way than the other. But, I could spy my setup with the help of a mirror using the mounting feet as a point of reference. See pic.
F4 Customs SWCV, Ultimate, Lidlox, Adjustable Side Vents, Leather Like Grips, SS Grills, Centramatic, Garmin XT2, BajaRon Original Sway Bar w/ Lamonster links, P238
Hey Jerry. Are you still working on this? The short answer is that it doesn't matter. This application is different from an auto application. This is just two ends of a DC coil. The wires probably fit easier one way than the other. But, I could spy my setup with the help of a mirror using the mounting feet as a point of reference. See pic.
Thank You. I have already completed the task. So I guess the orientation didn't matter? I did get it to turn over but NEW issues were found. "FUEL PUMP" is not working. UGH! Thank you for the reply.
Thank You. I have already completed the task. So I guess the orientation didn't matter? I did get it to turn over but NEW issues were found. "FUEL PUMP" is not working. UGH! Thank you for the reply.
Well, since you have the wiring diagram, any fuse or relay problem can be readily addressed. Be safe. Be seen. Watch out for deer.
F4 Customs SWCV, Ultimate, Lidlox, Adjustable Side Vents, Leather Like Grips, SS Grills, Centramatic, Garmin XT2, BajaRon Original Sway Bar w/ Lamonster links, P238