-
What's the correct Krickit reading for an RT's belt tension?
What should the Krikit reading be for a Spyder RT be, for the correct drive belt tension?
Last edited by Peter Aawen; 05-12-2021 at 04:50 PM.
Reason: Prefix & title - this is a 'How do I?' question not a 'How To: DIY' guide. ;-)
-
Very Active Member
Depends on model year. Older models have different specs than later models. Check out this post. https://www.spyderlovers.com/forums/...on#post1529743
New to Sue and I
2021, LTD, Asphalt Gray, 22,000 miles
Gone but not forgotten
RTS 2011 SM5, 95,000 miles
-
Very Active Member
Last edited by Peter Aawen; 05-12-2021 at 07:07 PM.
Reason: Added link just to be sure to be sure! ;-)
New to Sue and I
2021, LTD, Asphalt Gray, 22,000 miles
Gone but not forgotten
RTS 2011 SM5, 95,000 miles
-
Very Active Member
Originally Posted by joekeys
What should the Krikit reading be for a Spyder RT be, for the correct drive belt tension?
Tension depends on year and model .... You didn't provide that info .... But I did check your other posts .... for 2015 RT I ONLY measure it ON-THE-GROUND. , and like a little less tension than OEM spec.... so mine is around 160 lbs. measured in the middle of the belt..... At that tension my belt vibes dis-appeared ..... Mike
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|