-
Brake lever position - do I need a longer brake rod to move it?
I'm a proud owner of a new 2020 Spyder F3T coming from a street glide I think its great but I don't like the position of the brake lever. I understand I can move the foot pedal to position 4 or beyond but does that mean I need to purchase a longer brake rod? This just moves the assembly forward but doesn't lean the the pedal any further forward correct? Seems like an odd ball design to me.
Here is my new machine...
Screenshot from 2021-05-07 23-14-50.jpg
-
Very Active Member
-
Very Active Member
When I bought my '16 F3 Limited it didn't take me long to see where my feet landed naturally. I then changed my floorboards to the # 4 position. If you move the floorboard, you also need to change the brake rod. Check with Lamonster Garage for their brake rod. It changed the angle of the brake pedal.
2020 Chalk, RT Limited, Dark and matching RT622 trailer and BRP hitch. BRP Drivers Backrest, Auxiliary Light, Garmin Zumo XT, GPS Support, RT Rear Panel and Travel Cover. Spyderpops LEDs on fenders, mirrors, saddlebags, top case and RT rear panel. Spyderpops Rock Guard. BajaRon Swaybar, Wolo Bad Boy horn, Freedom Windshield, Elka Shocks.
-
I have looked at lamonster but their page says they're not for stock pegs just for floorboards. So it seems I'm back to buying the BRP rod and drilling a hole to drop the pedal a little bit if that is the correct procedure???
-
Very Active Member
Originally Posted by Ridethru
I have looked at lamonster but their page says they're not for stock pegs just for floorboards. So it seems I'm back to buying the BRP rod and drilling a hole to drop the pedal a little bit if that is the correct procedure???
I'm sorry. I passed right by where you said you had an F3T.
2020 Chalk, RT Limited, Dark and matching RT622 trailer and BRP hitch. BRP Drivers Backrest, Auxiliary Light, Garmin Zumo XT, GPS Support, RT Rear Panel and Travel Cover. Spyderpops LEDs on fenders, mirrors, saddlebags, top case and RT rear panel. Spyderpops Rock Guard. BajaRon Swaybar, Wolo Bad Boy horn, Freedom Windshield, Elka Shocks.
-
Very Active Member
I just drilled an extra hole in my clevis to adjust the pedal lower. You can make minor adjustments using washers under the rubber. Might need longer M6 bolts for that.
brake-rod.jpg
-
I had my foot rest moved to the 5 position ordered the brake rod through the dealer , was about$30 and they put it on for free ..
-
You all are awesome! I appreciate the input. I bought a position 4 rod and moved the pegs. Much better. I also bought the pos 5 rod but thats probably too long.
-
I have a 2020 f3s I bought the #3 brake rod from lamonster and it works great on my stock
pegs.i am fixing to buy the longer brake
pedal
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|