Can’t see the mirrors…

[frj322]

Hey all,
Been having this problem since purchasing my 2018 F3S. Due to the way my body is configured (5’08” with a very short torso) I just can’t see the mirrors. The way it works out the switch assemblies on the bars are directly in my line of sight and completely block the mirrors. Anyone had this issue? I’d looked at the Lamonster mirror/turn signal relocation kit but it’s been out of stock for 6 months with no expected restock date that I can find. I’d really love to be able to see behind me… Any ideas?
As always, thanks for any help you can offer….

[AZCanAm]

Hey all,
Been having this problem since purchasing my 2018 F3S. Due to the way my body is configured (5’08” with a very short torso) I just can’t see the mirrors. The way it works out the switch assemblies on the bars are directly in my line of sight and completely block the mirrors. Anyone had this issue? I’d looked at the Lamonster mirror/turn signal relocation kit but it’s been out of stock for 6 months with no expected restock date that I can find. I’d really love to be able to see behind me… Any ideas?
As always, thanks for any help you can offer….

Maybe try a different set of handle bars or risers.

[PW2013STL]

You may need to go this route.

http://www.lamonstergarage.com/mirrors-1/

[frj322]

Thanks for the replies folks. I’d love to try the Lamonster relocation kit but, again, not in stock. I’m going to try rotating the bars down just a bit to try to improve line of sight.

[Motorcycledave]

Hey all,
Been having this problem since purchasing my 2018 F3S. Due to the way my body is configured (5’08” with a very short torso) I just can’t see the mirrors. The way it works out the switch assemblies on the bars are directly in my line of sight and completely block the mirrors. Anyone had this issue? I’d looked at the Lamonster mirror/turn signal relocation kit but it’s been out of stock for 6 months with no expected restock date that I can find. I’d really love to be able to see behind me… Any ideas?
As always, thanks for any help you can offer….

This should do the trick and does not cost an arm and a leg
Dave
Motorcycle Dave's LOGO #1.jpg
bar risers.jpg

[frj322]

Thanks Dave but I’ve got an F3…. Picture says this fits the older machines, looks cool though.

[bikerbillone]

Not sure if it will work on your f3, but I had to roll my short reach bars on my RTL down to get my hands and grips out of the mirrors.

[Lew L]

Will bar end mirrors work??? Have them on the poor, old, slow V-Max. Another inexpensive alternative.

Lew L

[frj322]

I hadn’t considered that… do you know of a link?

[UtahPete]

I hadn’t considered that… do you know of a link?

https://www.amazon.com/s?k=bar+end+m...b_sb_ss_sc_3_8

[Lew L]

.

Thanks Pete---------- I wouldn't have thought of that. ----------- This is the symbol for joking. I can be a bit sarcastic---- ya sure I know it's the lowest form of humor but I'm So good at it

Lew L

[UtahPete]

.

Thanks Pete---------- I wouldn't have thought of that. ----------- This is the symbol for joking. I can be a bit sarcastic---- ya sure I know it's the lowest form of humor but I'm So good at it

Lew L

We're probably both suffering from altitude sickness...

[Motorcycledave]

Hey all,
Been having this problem since purchasing my 2018 F3S. Due to the way my body is configured (5’08” with a very short torso) I just can’t see the mirrors. The way it works out the switch assemblies on the bars are directly in my line of sight and completely block the mirrors. Anyone had this issue? I’d looked at the Lamonster mirror/turn signal relocation kit but it’s been out of stock for 6 months with no expected restock date that I can find. I’d really love to be able to see behind me… Any ideas?
As always, thanks for any help you can offer….

Here ie the best cure for your problem, I have used them on Goldwings, ST1100 & ST1300 and my Spyder. https://saeng.com/product/quick-scans/

[frj322]

Thanks! Will check into those for sure!