-
Anyone found a usb with switch to fit 2021 dash hole?
has anyone found a switch with usb for the blank spot that fits the hole
-
Originally Posted by fatboy
has anyone found a switch with usb for the blank spot that fits the hole
Not yet, but I refuse to give up. If you find something please post results.
-
Very Active Member
You can hunt for months or just mod the blank cover to accept a switch. That's what I did.
-
I'm looking at using a 'surface mount' USB port, but I'll be mounting it in the LH woofer speaker cavity. The speaker grill pops out easily for access and your charging cables can be routed up thru the steering column. I will post some pics when I get it completed.
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
-
Active Member
-
Very Active Member
Originally Posted by fatboy
has anyone found a switch with usb for the blank spot that fits the hole
Call Frank at https://www.foxtrot4x4.com/ He can probably help you. He was able to get me a few things I needed.
2020 Chalk, RT Limited, Dark and matching RT622 trailer and BRP hitch. BRP Drivers Backrest, Auxiliary Light, Garmin Zumo XT, GPS Support, RT Rear Panel and Travel Cover. Spyderpops LEDs on fenders, mirrors, saddlebags, top case and RT rear panel. Spyderpops Rock Guard. BajaRon Swaybar, Wolo Bad Boy horn, Freedom Windshield, Elka Shocks.
-
Very Active Member
-
Originally Posted by K80Shooter
Agree. There is plenty of room below the radio control array for one of these AND a powerlet port too (if desired). If I had to do mine again, this is what I would do.
-
I found a number of these USB port connectors on Amazon and they (sort of) fit into the 'blank' space on the dash. It wasn't exactly easy, but it came out looking OK.
https://www.amazon.com/dp/B08RZ326Y1...v_ov_lig_dp_it2021SpyderRTL-10.jpg2021SpyderRTL-09.jpg
-
-
Originally Posted by K80Shooter
I bought 3 sets of these and they are great EXCEPT that the soft-touch power switch on 2 of them didn't work; one failed in the 'on' position and the other in the 'off position.
2014 RTL Platinum
-
Originally Posted by Donbmw
That's a nice product but has no on/off switch.
2014 RTL Platinum
-
Originally Posted by UtahPete
That's a nice product but has no on/off switch.
PRODUCT DESCRIPTION
Dual USB Charger for RT 2010-2019 and ST 2013-2016 (Blue LED)
This is a nice alternative to getting all your electronics charged while riding. It's a perfect fit in one of those available slots just beneath the steering wheel. Install in about 45 minutes if you take your time, you can actually just use the wiring behind the dashboard. Not recommended for a direct battery hook up because with the LED light always on it will bring down the battery. You're better off with the power coming on with a key activate power source.
-
I tied into the adjacent heated seat 12V circuit (which is a switched circuit). But the 2021 RTL spare slot must be somewhat larger then earlier models because this 'rocker switch' unit will not simply snap into place.
-
The cutout size on the 20-21 RT is 22mm wide X 45mm long.
Most of those USB ports are 21mm wide x 36.5mm long (which might be the size of the cutouts on the pre 2020s?).
The width will work but the length (which is where the clips are located) will not.
Like a few others here, I took a Dremel to the blank filler piece but Carling does make an adapter that you can buy but you may have a hard time finding it.
-
Active Member
This is my solution, I put some velcro under the gauges, and I stick a 30000mah lithiumbatterypack on that, then I can charge anything during the day, I have 2 of those, one is being charged in the frunk, while the other is in use.
No cable clutter, no holes to drill, and heck even if you use it alot, 10000mah, would also be sufficient.
and when the cardo's need to to be ravamped, I just put it in my jacket, or to the hotelroom, or where ever I am at that moment.
They are cheap nowadays, and for me they work
the funniest thing about this particular signature is that by the time you realise it doesn't say anything it's to late to stop reading it........
Spyder F3s 2019 All Black ( Named it: Brutus)
Carbon Items added, just for looks
Upgraded Shocks Trac-Tive, Rear hi/lo and rebound adjustable, with Hydraulic Pre-Load adjuster
fronts hi/lo and rebound adjustable, custom made by the Trac-Tive Guru's
Swaybar (Ron's)
Tyres Front Michelin Cross Climate+ 175/60-15
Rear, for 2022 still a Kenda, next Yokohama Advan Fleva 205/55R15
Exhaust Bone stock, with a RLS Cat- Delete
Custom ECU-Mapping, rewritten/adapted to my Ridingstyle
Pedalbox, Awesome Upgrade...
-
I was going to install a USB port in the spare switch spot too for a clean (none cluttered look) but discovered the slingmods garage door opener and installed that instead, and went with the slingmods plug and play ram mount USB/power port set up.
If you have the blank switch cover plate you can buy one of the basic USB ports block and modify it to hold something like this.
https://www.amazon.com/MOTOPOWER-MP0...cycle-Charger/
or get something like this and just mount to the bars.
https://www.amazon.com/Tingrua-Motor...ike-Handlebar/
sorry links don't work but if you type in the name it will come up.
2021 Sea to Sky , cyclops light, front fender light/turn signal, rear run/brake/ turn signal LED strip, BRP floor board light Green
-
If I was going to use that I would wire a relay into it triggered by the accessory port that on the right side. The relay needs minimal power to trigger and you can run the power to the relay directly from the battery. Then you have a keyed USB port.
2021 Spyder RT-L Deep Marsalsa Metalic
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|