Results 1 to 3 of 3
  1. #1
    Member
    Join Date
    Mar 2021
    Location
    Missouri
    Posts
    10
    Spyder Garage
    0

    Default Jacking up Ryker for oil change - where's the best jacking points?

    It seems like everyone uses different areas to jack up their Ryker.

    Where is the best safest area to jack up the front end to put two jack stands under it... and the best area to either leave the jack or put one jack stand under the rear?

    Thanks!

  2. #2
    Active Member
    Join Date
    Jul 2020
    Location
    Florida
    Posts
    334
    Spyder Garage
    0

    Default

    I've never used jack stands on the front, so I really cant answer your question on front placement. I've found it easier to just drive it up on a set of Rhino wheel ramps in the front and jack up the rear. I place the jack underneath the rear on the drivers side pivot point on the frame right behind the exhaust can.
    2020 Can Am Ryker Rally Sport Touring Edition

  3. #3
    Very Active Member SportsterDoc's Avatar
    Join Date
    May 2020
    Location
    New Mexico
    Posts
    788
    Spyder Garage
    1
    23 Moto Guzzi V7-850 SE 23 Yamaha XT250 18 Yamaha Bolt R-Spec 22 Triumph Street Twin 20 CanAM Ryker 900 14 Honda CB1100 18 Yamaha XT250 16 Moto Guzzi V7 II 17 Yamaha TW200 12 Triumph Bonneville 02 Sportster 1200 Sport 03 Sportster 883 76 Honda CB750F 75 Honda CB360 70 Yamaha CT1 72 Yamaha CT2 72 Yamaha AT2/CT2 70 Honda SL350 70 Honda CL350 67 Honda CL160 67 Honda CB160 62 Honda CA110
    2020 900 , NGK 4218 iridium CR8EIX Matte black

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •