-
Active Member
Absolutely Amazing after Installing BajaRon sway bar!
Installed the BajaRon sway bar today. How can so many things improve at the same time? I salute you sir!
Oh, and a shout out to LaMonster for super fast shipping.
And I thank you all for convincing me...
20210410_181957 by [url=https://www.flickr.com/photos/182341401@N05/]
-
Change your front tires to car tires and you go up one more level in handling..each mod ups the handling of the spyder and you just did the #1 upgrade..tires/shocks just ups the fun factor..Ron's sway bar should be a factory option.
-
Active Member
Thanks for the advice. So changing the front tires makes that much of a difference? I will have to research this for sure.
-
Active Member
Tyres are also my next mod, still pondering bout the vredesteins quatrac, but I am a nice weather motorist, and between the michelin crossclimate..
But have to agree with AZCANAM, it does make the bike a whole other beast. now it's actually point and shoot at twisties.
It's just amazing how BajaRon's swaybar, changes ride dynamics.
the funniest thing about this particular signature is that by the time you realise it doesn't say anything it's to late to stop reading it........
Spyder F3s 2019 All Black ( Named it: Brutus)
Carbon Items added, just for looks
Upgraded Shocks Trac-Tive, Rear hi/lo and rebound adjustable, with Hydraulic Pre-Load adjuster
fronts hi/lo and rebound adjustable, custom made by the Trac-Tive Guru's
Swaybar (Ron's)
Tyres Front Michelin Cross Climate+ 175/60-15
Rear, for 2022 still a Kenda, next Yokohama Advan Fleva 205/55R15
Exhaust Bone stock, with a RLS Cat- Delete
Custom ECU-Mapping, rewritten/adapted to my Ridingstyle
Pedalbox, Awesome Upgrade...
-
Very Active Member
Based on advice and comments offered here, I swapped the front tires for Vrederstein Quatracs on my 2015 RT-S and recently added Ron's anti-sway bar and am very, very happy.
-
Having followed advise of many on this site, I switched to Q5’s on the front and added a Baja Ron sway bar! Coming this month will be a laser alignment, my local dealer in Albuquerque finally bought the tools needed to provide this service! All these improvements make the ride so much more enjoyable!
-
Active Member
i put 2 in last week . what a big difference
-
Active Member
What do you guys think about this combo? After reading through the threads, this seems to be the ticket. I wanted to maintain the "beef" in the rear end being that kind of guy so I chose the Kumho. Feedback would be appreciated.
tire by [url=https://www.flickr.com/photos/182341401@N05/]
-
I think that combination would work great! Two very good tire manufacturers and I agree with the Kumho for the rear. Think you will feel a much better ride once you have them installed.
-
Ozzie Ozzie Ozzie
2013 RT Ltd Pearl White
Ryde More, Worry Less!
-
Very Active Member
I had the Kumho and was not impressed. It was fine when it was brand new, but as Peter said, it got pretty scary when the tread started wearing down. I tow a trailer on most of our vacation rides, and I stopped in OH for the night just a few hours from home, because the tire had gotton so bad in the rain. Dry traction was still good.
-
SpyderLovers Sponsor
Originally Posted by Fatcycledaddy
I had the Kumho and was not impressed. It was fine when it was brand new, but as Peter said, it got pretty scary when the tread started wearing down. I tow a trailer on most of our vacation rides, and I stopped in OH for the night just a few hours from home, because the tire had gotton so bad in the rain. Dry traction was still good.
I have been a big proponent of mounting car tires to Spyders from early on. Frankly, the OEM Kendas are atrocious. But I have found the same thing you mention to be true with some of the car tires I've tried. The Toyo Proxes TR1 was my 1st, and the best car tire I've used. It wore evenly across the full tread area, ran smooth and gave me good traction, wet or dry, all the way to the end. But this tire doesn't come in sizes that we can use anymore. The Falken 912 that I am running now came highly recommend. And it does fine in the dry. But gets very greasy in the rain. In my opinion, probably just about any car tire will work well in good weather. But not necessarily in the rain, or as they wear. Still, worlds better than the OEM Kendas and a worthwhile compromise for just about everyone.
Enter the Kenda Kanine. Kenda builds the OEM Spyder tires for BRP based upon BRP specs. Not NECESSARILY a Kenda issue. There was a 12 year patent or Non-Compete (not sure which) on them which has now expired. Kenda CAN build a decent tire. Now I know why they didn't for the Spyder. From the feedback I'm getting, which is admittedly somewhat scarce, these new Kenda Kanines may be the answer I've been looking for.
I am always looking for a better product or way to do things. Though car tires are a big improvement over the OEM Kendas. They, for me at least, have not been ideal. I really want to stay with the OEM tire sizes, which have become harder and harder to find in a car tire.
With a car tire you're always going to be trading traction for longer life. A car tire is always going to have a lot more pounds per square inch on the tread area built into the equation. So, for other than race tires, rubber compounds are harder. Traction, for a car, is still good because of the weight/pressure on the tread surface. Not so with a Spyder application. Especially in the rain where the rear tire on the Spyder is prone to hydroplane because it is very light with a wide tire.
For many, car tires are a great trade-off. As it was for me with the Toyo. But for me, I'd be willing to sacrifice some longevity for improved traction. Especially in wet conditions.
So, I am swapping all 3 tires out for the new Kenda Kanines. The Falkens I am running now are almost new. But I don't like them, so it isn't a big sacrifice and I want to know if the feedback I'm getting on the Kenda Kanines is accurate. It appears that Kenda has addressed the things I hate about the OEM tires.
#1, the weak tread area with just 2 plies on the OEM Kendas. This causes the rear tire to balloon out at speed, reducing the contact patch to about 2.5 inches. This is why they wear out so quickly in the middle. The Kanines have a 3 ply tread construction (car tires typically have 4 ply. But again, this is a weight carrying component). Will 3 plies be enough to resolve the ballooning, reduced contact patch, uneven wear issue? From feedback I've gotten, the answer seems to be yes. We'll see.
#2, many of the OEM Kendas are not round, (which you can't fix). And even if they are round, it takes a lot of weight to balance the wheel. From feedback I've gotten, this has also been addressed in the Kanine. Again, we'll see. I will know the answer to this soon as I plan to have them mounted this week.
#3, then we could talk about the cord failures with the OEM tires. Design or production flaw? We'll see.
The rubber compound on the Kanines (as with the OEM tires) should be better suited to the weight and traction needs of the Spyder. I am hoping that the Kanines are a good option for people, like me, who are willing to trade some tire mileage for better traction. I have not promoted or listed the Kanines yet. I want to run them first. But I do have a source for them. I've already sent a few sets out. It's early. But so far, customers have been happy.
I am hoping it doesn't take 12 years to get a decent tire for the Ryker!
I will keep you posted.
Last edited by BajaRon; 04-13-2021 at 09:53 AM.
Shop Ph: 423-609-7588 (M-F, 8-5, Eastern Time)
Only SLOW people have to leave on time...
-
Active Member
Originally Posted by BajaRon
I have been a big proponent of mounting car tires to Spyders from early on. Frankly, the OEM Kendas are atrocious. But I have found the same thing you mention to be true with some of the car tires I've tried. The Toyo Proxes TR1 was my 1st, and the best car tire I've used. It wore evenly across the full tread area, ran smooth and gave me good traction, wet or dry, all the way to the end. But this tire doesn't come in sizes that we can use anymore. The Falken 912 that I am running now came highly recommend. And it does fine in the dry. But gets very greasy in the rain. In my opinion, probably just about any car tire will work well in good weather. But not necessarily in the rain, or as they wear. Still, worlds better than the OEM Kendas and a worthwhile compromise for just about everyone.
Enter the Kenda Kanine. Kenda builds the OEM Spyder tires for BRP based upon BRP specs. Not NECESSARILY a Kenda issue. There was a 12 year patent or Non-Compete (not sure which) on them which has now expired. Kenda CAN build a decent tire. Now I know why they didn't for the Spyder. From the feedback I'm getting, which is admittedly somewhat scarce, these new Kenda Kanines may be the answer I've been looking for.
I am always looking for a better product or way to do things. Though car tires are a big improvement over the OEM Kendas. They, for me at least, have not been ideal. I really want to stay with the OEM tire sizes, which have become harder and harder to find in a car tire.
With a car tire you're always going to be trading traction for longer life. A car tire is always going to have a lot more pounds per square inch on the tread area built into the equation. So, for other than race tires, rubber compounds are harder. Traction, for a car, is still good because of the weight/pressure on the tread surface. Not so with a Spyder application. Especially in the rain where the rear tire on the Spyder is prone to hydroplane because it is very light with a wide tire.
For many, car tires are a great trade-off. As it was for me with the Toyo. But for me, I'd be willing to sacrifice some longevity for improved traction. Especially in wet conditions.
So, I am swapping all 3 tires out for the new Kenda Kanines. The Falkens I am running now are almost new. But I don't like them, so it isn't a big sacrifice and I want to know if the feedback I'm getting on the Kenda Kanines is accurate. It appears that Kenda has addressed the things I hate about the OEM tires.
#1, the weak tread area with just 2 plies on the OEM Kendas. This causes the rear tire to balloon out at speed, reducing the contact patch to about 2.5 inches. This is why they wear out so quickly in the middle. The Kanines have a 3 ply tread construction (car tires typically have 4 ply. But again, this is a weight carrying component). Will 3 plies be enough to resolve the ballooning, reduced contact patch, uneven wear issue? From feedback I've gotten, the answer seems to be yes. We'll see.
#2, many of the OEM Kendas are not round, (which you can't fix). And even if they are round, it takes a lot of weight to balance the wheel. From feedback I've gotten, this has also been addressed in the Kanine. Again, we'll see. I will know the answer to this soon as I plan to have them mounted this week.
#3, then we could talk about the cord failures with the OEM tires. Design or production flaw? We'll see.
The rubber compound on the Kanines (as with the OEM tires) should be better suited to the weight and traction needs of the Spyder. I am hoping that the Kanines are a good option for people, like me, who are willing to trade some tire mileage for better traction. I have not promoted or listed the Kanines yet. I want to run them first. But I do have a source for them. I've already sent a few sets out. It's early. But so far, customers have been happy.
I am hoping it doesn't take 12 years to get a decent tire for the Ryker!
I will keep you posted.
Well BajaRon,
As you know I could not be happier with the Vredestein's in size 165/60/15 I put on the front wheels.
Since the dealer is willing to mount an OEM similar tire for "free", I decided to take a chance and put the Kanine on the rear. Since the tire is $100 installed why not?
The Kanine will be installed on April 29th. I will provide feedback for sure. Stay tuned...
-
SpyderLovers Sponsor
Originally Posted by AZCanAm
Well BajaRon,
As you know I could not be happier with the Vredestein's in size 165/60/15 I put on the front wheels.
Since the dealer is willing to mount an OEM similar tire for "free", I decided to take a chance and put the Kanine on the rear. Since the tire is $100 installed why not?
The Kanine will be installed on April 29th. I will provide feedback for sure. Stay tuned...
Awesome! I am happy to get any feedback I can. I'm not saying car tires are a bad idea. The right car tire can work very well. The problem has been the dwindling supply in sizes that fit the Spyder. And zero alternatives for the Ryker. I am hoping that the Kanines prove to be a reliable alternative giving everyone another option.
I am encouraged by the, so far, positive reviews.
Shop Ph: 423-609-7588 (M-F, 8-5, Eastern Time)
Only SLOW people have to leave on time...
-
Active Member
Thanks Peter & Don.
For the moment I just ordered the front Vreds because I have not found a shop willing to mount the rear tire.
Discount tires will mount and balance the fronts though. They will arrive tomorrow and be on the Spyder by Wednesday.
-
Active Member
Originally Posted by AZCanAm
Thanks Peter & Don.
For the moment I just ordered the front Vreds because I have not found a shop willing to mount the rear tire.
Discount tires will mount and balance the fronts though. They will arrive tomorrow and be on the Spyder by Wednesday.
Ridenow in Peoria AZ will mount and balance owner provided tires.
-
Very Active Member
Originally Posted by CA Railwhale
Ridenow in Peoria AZ will mount and balance owner provided tires.
Nash in Mesa did also.
2018 RT Ltd - Asphalt Metallic - East Valley of Phoenix
2018 RT Ltd Chrome - Champagne Metallic - Lake Stevens, Wa
(Champagne/Hooker) Magic Mirrors, 360 LED head lights, BajaRon sway bar, H&R springs and shock adjusters, dash cam, foam grips, third brake light 4 LED strobe for 7 seconds and then on steady, rear LED turn signals/8 ohm 50W resistors, sequential turn signals on front fenders, Vredestein and PPA Orb wheels on front and General out back, and driver backrest.
Things that move between machines: Ikea sheep skins, Zumo XT GPS, and extra tools. Hooker is going to be my summer trike up North; and Hookie my winter trike down South.
(Asphalt/Hookie) Elka shocks on front - BajaRon sway bar, OEM driver's backrest, LED headlights, dual USB with voltmeter, dash cam, foam grips - Magic Mirrors - front tires Vredestein Quatrac SL on PPA ORB Chrome wheels.
-
Active Member
Thanks for your input Bajaron. I am now going to "wait-n-see" if the Kanine is the right tire to put on the rear. In the mean time my Vredestein's will be installed in the fronts soon.
-
SpyderLovers Sponsor
Originally Posted by AZCanAm
Thanks for your input Bajaron. I am now going to "wait-n-see" if the Kanine is the right tire to put on the rear. In the mean time my Vredestein's will be installed in the fronts soon.
I am really hoping they work out. I may be hoping too hard. We'll see...
Shop Ph: 423-609-7588 (M-F, 8-5, Eastern Time)
Only SLOW people have to leave on time...
-
Very Active Member
Harrington, Australia
2021 RT Limited
Setup for Tall & Big.... 200cm/6'7", 140kg/300lbs, 37"inleg.
HeliBars Handlebars
Brake rubber removed to lower pedal for easier long leg/Size 15 EEEEW boot access.
Ikon (Aussie) shocks all round.
Russell Daylong seat 2” taller than stock (in Sunbrella for Aussie heat & water resistance)
Goodyear Duragrip 165/60 fronts (18psi) - provides extra 1/2” ground clearance.
Kenda Kanine rear.
2021 RT Limited , Brake pedal rubber removed for ease of accessing pedal with size 15 boots. Red
-
Active Member
Originally Posted by BajaRon
I am really hoping they work out. I may be hoping too hard. We'll see...
So far so good with the Kanine rear tire. Definitely feels more stable at highway speeds (satisfied). So much so, I am kinda regretting ordering the stage 2 Elka's to replace the rear coil-over.
The Kanine is a nice improvement over the stock OEM's but pretty much anything is.
The next review will be after I install the stage 2 Elka rear shock.
-
Very Active Member
Toyo Proxes T 185/55-15 up front. They do require adding clearance for the fenders easily done with a coupla 3/8" lock washers on the fender mounts which move the fenders toward the frunk. Details?
to see MY SPYDER PAGE
ftires.jpg
-
Active Member
Has anyone noticed the improved (IMO) fender gap with the Vred 165/60/15? To me another benefit.
20210416_150700 by [url=https://www.flickr.com/photos/182341401@N05/]
Last edited by Peter Aawen; 04-16-2021 at 08:32 PM.
-
Ozzie Ozzie Ozzie
2013 RT Ltd Pearl White
Ryde More, Worry Less!
-
Active Member
Much like with cars, most people prefer less of a gap between the fender and the top of the tire. Usually an optical illusion of your car being lower. So it's not the tire, it is the tire size. Although in my opinion the Veredestein is a better looking tire than oem. Sorry about the confusion.
Edit: So much for a picture being worth a thousand words.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|