for 2020 Ryker Rally with backrest on max mount? Want to tour with hubby (he has Indian Tourmaster)...but finding a luggage rack that works with Slingmode back rest with max mount is proving a challenge...any suggestions? Fabrications? Also luggage suggestions? Thank you! Windhound
Other than the Slingmods luggage set, and or the single side case option from BRP, there's not a lot out there specifically for the Rykers yet. If not able to do it yourself, you might want to consider having a bracket or brackets fabricated for your machine at a local welding shop. This will allow you to use many of the other aftermarket luggage side cases and top cases thats out there. Many of us here have gone that route and fabbed up brackets ourselves and use other aftermarket luggage sets. Wish I had a better answer for you but due to a lack of a rear frame on the Rykers, most of the universal brackets thats out there will not work on the Rykers, at least not without modifications and additional bracket work.
to make it "easier" you could buy a rack with cases from Shod or GIVI - if you dn`t need the passenger seat it should be easy to adapt the parts to the max-mount, I use a Version for the BMW S 1000XR with the smaller SH23 Cases from Shad .. one U-bracket over the maxmount und two brackets from the frame to the lower points of the rack .. should not be a problem to make them.. (the Set from Shad with the BMW- brackets is around 350,- )
Outlander fairing - Fox-shock - BajaRon Swaybar - Hankook tire/ back - 165/50 Imperial tires front & longer front shocks - GIVI Topase - Shad sidecases -heated grips - new seats
thank you! Will have hubby look at your suggestion since his talents run to modification. Just ordered the Nelson commuter bag to attach to max mount for everyday commute. Found it for $40 less than Slingmods on Amazon. Windhound