Muffler mod

[Lehrman]

Has anyone modified the stock muffler on the 1330 to make it louder? Can baffles be removed or drilled out? Any suggestions or is this a bad idea?

[troop]

The stock muffler has quite a few chambers in it. Wouldn't be cost effective to destroy it. Cheaper to just get a cat delete pipe..

[PMK]

Has anyone modified the stock muffler on the 1330 to make it louder? Can baffles be removed or drilled out? Any suggestions or is this a bad idea?

I have cut open a 1330 RT muffler off a 2014 to 2019 model. There are no true internal baffles. It is a chambered muffler, sort of like a Flowmaster.

No doubt you could cut it open and remove or drill the chamber walls, but doing so may gain nothing but noise or could even diminish power output.

[Dennis in Lodi]

http://www.spyderlovers.com/forums/s...ipes-available

The muffler on the right is available.
$100 ?? Just collecting dust. Has at least one sound insert installed. Use with or without cat delete. Not too loud down low but barks a bit starting at 5K rpm.
Dennis 608-347-7959 for pics or more info? Cost me $650

[Peter Aawen]

That link's not working for me Dennis!

Belay that - found the problem, fixed it! So the link in your post should now work.

[MONK]

According to Shawn Smoak, the F3T/L muffler has a little more growl. If I could find one cheap, I'd try it out.