-
Active Member
Muffler mod
Has anyone modified the stock muffler on the 1330 to make it louder? Can baffles be removed or drilled out? Any suggestions or is this a bad idea?
-
Very Active Member
The stock muffler has quite a few chambers in it. Wouldn't be cost effective to destroy it. Cheaper to just get a cat delete pipe..
2022 RT Sea To Sky
--------------------------------
-
Very Active Member
Originally Posted by Lehrman
Has anyone modified the stock muffler on the 1330 to make it louder? Can baffles be removed or drilled out? Any suggestions or is this a bad idea?
I have cut open a 1330 RT muffler off a 2014 to 2019 model. There are no true internal baffles. It is a chambered muffler, sort of like a Flowmaster.
No doubt you could cut it open and remove or drill the chamber walls, but doing so may gain nothing but noise or could even diminish power output.
-
http://www.spyderlovers.com/forums/s...ipes-available
The muffler on the right is available.
$100 ?? Just collecting dust. Has at least one sound insert installed. Use with or without cat delete. Not too loud down low but barks a bit starting at 5K rpm.
Dennis 608-347-7959 for pics or more info? Cost me $650
Last edited by Peter Aawen; 04-05-2021 at 06:09 PM.
Reason: Fixed the link?!
-
Ozzie Ozzie Ozzie
That link's not working for me Dennis!
Belay that - found the problem, fixed it! So the link in your post should now work.
Last edited by Peter Aawen; 04-05-2021 at 06:10 PM.
2013 RT Ltd Pearl White
Ryde More, Worry Less!
-
According to Shawn Smoak, the F3T/L muffler has a little more growl. If I could find one cheap, I'd try it out.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|