Results 1 to 8 of 8
  1. #1
    Active Member
    Join Date
    Jan 2021
    Location
    northeast pa.
    Posts
    318
    Spyder Garage
    0

    Default After topcase removal, can I keep the antenna?

    so i just bought a F3 limited.. i am also going to purchase the cover needed after the topcase is removed.. can the antenna then be mounted to the cover,, thanks..

  2. #2
    Active Member
    Join Date
    Apr 2016
    Location
    Bloomington, Minnesota
    Posts
    278
    Spyder Garage
    0

    Default

    I am sure you can work it out. The antenna does have a plug-in under the seat. I think they put Loctite on the attacking nut as I had a heck of a time getting it off of mine.

    An alternative is plugging in an aftermarket shorty antenna to the under-seat junction. this would be easier to place and not distract from your new setup.

  3. #3
    Very Active Member
    Join Date
    Feb 2020
    Location
    N. Wilkesboro, NC
    Posts
    1,902
    Spyder Garage
    0

    Default

    Never had an F3 but the F3T looks like it has the antenna mounted between the left saddlebag and that cover. Could be BuRP sells something to mount the Limited antenna there if you remove the top case.

    InkedF3T_LI.jpg
    Attached Images Attached Images

  4. #4
    Active Member
    Join Date
    May 2017
    Location
    Central Texas
    Posts
    117
    Spyder Garage
    0

    Default

    Quote Originally Posted by fredgal View Post
    so i just bought a F3 limited.. i am also going to purchase the cover needed after the topcase is removed.. can the antenna then be mounted to the cover,, thanks..
    As I was taking everything apart I noticed the OEM antenna will fit under the rear panel & passenger seat. I put a powered amplified antenna in the dash, because I put a CB antenna on the rear trunk, in original location.

  5. #5
    Member
    Join Date
    May 2021
    Location
    Washington
    Posts
    1
    Spyder Garage
    0

    Default

    How do you secure the antenna to the area on that picture

  6. #6
    Invalid Emails
    Join Date
    Mar 2008
    Location
    Blue Grass, Iowa
    Posts
    150
    Spyder Garage
    0

    Default

    How difficult is the top case removal? Does the passenger backrest remain?

  7. #7
    Active Member
    Join Date
    Jan 2021
    Location
    northeast pa.
    Posts
    318
    Spyder Garage
    0

    Default

    Quote Originally Posted by McGone View Post
    How difficult is the top case removal? Does the passenger backrest remain?
    all one piece, it will look like a F3... non limited.
    2020 F3 limited, liquid titanium
    grip puppies
    Bajaron sway bar
    lamonster belt dampener
    battery tender
    19 in freedom tinted windshield
    matte black daytona frunk wrap
    Quadtrac 165/60's

  8. #8
    SpyderLovers Sponsor cptjam's Avatar
    Join Date
    Jul 2010
    Location
    Las Vegas, NV
    Posts
    3,850
    Spyder Garage
    0

    Default

    Two screws. Backrest is part of the top case. All comes off together. We replaced the antenna with a wire antenna from Amazon.
    Joe Meyer



    Dealer for the Outlaw/ROLO laser Alignment system

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •