Can I fit aftermarket mirrors on Lamonster top cuff?
I have the Lamonster top cuff and drink holder on the drivers left side. Will the cuff take aftermarket mirrors and if so what is the size of the screw in part. Any suggestions for mirrors would be appreciated. TIA
The Spyder Cuff I got on our 2018 RTL has 1/4-20 pre drilled holes only as deep as the cuff is thick. Some of the holes on the cuff also have an plug that takes an allen key that keeps gunk from getting in the threads when that hole isn't used. There are mirrors that attach with the RAM mounts that go on the cuff. They are pretty popular with off-roaders because they swing away when hitting brush or in a fall. I put "RAM mount mirrors" in to the search engine and got a bunch of suggestions that would work.
2018 Can Am Spyder RT Limited, 2013 Triumph Bonneville T100
Motorcycle Rights: AMA Charter Life Member, MRF, FORR Life Member Local 11 Southwest Missouri, Mid-South MILE organizing committee member
2018 RT Limited , Got one, on, then off then on until Gloria decides if she likes it or not. blue
The drilled hole that comes with the plastic plug is drilled/tapped to accept M10-1.25 threads for accessory mirrors. The drilled holes with the stainless steel button head screws are for 1/4-20 threaded accessories. The (2) holes are different sizes.
2022 RT Sea To Sky
--------------------------------