Results 1 to 3 of 3
  1. #1
    Active Member
    Join Date
    Jun 2020
    Location
    San Antonio, TX
    Posts
    164
    Spyder Garage
    0

    Default Tricled fenders lights on 2013 RTL

    Good morning all,

    I purchased the Tricled sequential fenders lights/turn signals from Slingmods. One of the many reasons I bought them was the great video showing install. What I discovered upon install is the RT in their video is much different than mine. The lights fit 2013-2018 and I’m guessing the video is of a newer model. I’ve contacted them and they are supposed to get back to me. But, I thought someone here may have installed them on a 2013 and have pictures, directions, or a video. The big difference is removing the Tupperware and I have not had to do that before. The Tupperware in their video (must be a 2018 RTL) is not the same as the 2013 as far as I can tell. I searched the forum but I did not come up with anything....I may have searched incorrectly.

    I installed the lights on the fenders and that’s pretty straight forward...it’s removing the correct pieces of Tupperware to get the wire up to the turn signals at the mirrors. I’m sure Slingmods will get back to me at some point. But, I’m thinking several have done it here and may help me speed up the process.

    BTW, the fender lights are bright and really increase visibility - a great purchase!

    Jerry
    2013 RTL

  2. #2
    Active Member rick_w's Avatar
    Join Date
    May 2013
    Location
    NE Ohio, Madison
    Posts
    495
    Spyder Garage
    0

    Default

    We did a Video on those a while back to help customers with the install.
    The 2013 through 2018 are all the same except the base models which have the older style flat fenders.
    https://www.youtube.com/watch?v=9rVKOnW_ab0
    https://store.valueaccessories.net/2...SpyderAll.aspx

    That should help.
    Rick
    Value-Accessories
    Rick
    Spyder Lovers Vendor
    Value-Accessories

  3. #3
    Active Member
    Join Date
    Jun 2020
    Location
    San Antonio, TX
    Posts
    164
    Spyder Garage
    0

    Default

    Quote Originally Posted by rick_w View Post
    We did a Video on those a while back to help customers with the install.
    The 2013 through 2018 are all the same except the base models which have the older style flat fenders.
    https://www.youtube.com/watch?v=9rVKOnW_ab0
    https://store.valueaccessories.net/2...SpyderAll.aspx

    That should help.
    Rick
    Value-Accessories
    Rick,

    Appreciate the response. I was hoping to get directions on how to remove all the panels to run the wire up to the mirrors for a 2013. I do have the fenders wired already but was unsure of how to remove all the plastic panels.

    Jerry

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •