-
Rear drive belt pulley fitment?
I have to replace my rear belt pulley. Will the pulley from 2012 Rt fit a 2013?
Thanks in advance
Glen
-
The part numbers are the same, so I would think it would. Part# 705502015 or 705502016, depending on color.
Peggy and Howard
Hers: 2013 Spyder ST-S SM5
His: 1999 Honda VFR Interceptor
-
Originally Posted by Possible
The part numbers are the same, so I would think it would. Part# 705502015 or 705502016, depending on color.
This is the item I’m looking at
https://www.ebay.com/p/18028240835
-
Looks like it would work. The part number is different because it was superseded by the new number. 79 is
the correct number of teeth.
If I needed one I'd go for it, a new one is about $350.
Just out of curiosity, what happened that you need a new rear pulley? No need to answer if it's embarrassing.
Peggy and Howard
Hers: 2013 Spyder ST-S SM5
His: 1999 Honda VFR Interceptor
-
Originally Posted by Possible
Looks like it would work. The part number is different because it was superseded by the new number. 79 is
the correct number of teeth.
If I needed one I'd go for it, a new one is about $350.
Just out of curiosity, what happened that you need a new rear pulley? No need to answer if it's embarrassing.
Well I hit a good sized chunk of cement that destroyed my rear tire, belt, and pulley. So I’m searching for all three. The tire is easy but the belt and pulley is proving to be difficult
Last edited by Peter Aawen; 02-04-2021 at 05:35 PM.
Reason: ,
-
Ah, gotcha. Ebay is a great source for stuff. I use it all the time.
Peggy and Howard
Hers: 2013 Spyder ST-S SM5
His: 1999 Honda VFR Interceptor
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|