Help Me Decide!! Going to wrap my tricycle this weekend!
What's up guys?? I'm new to the community and want to say hi! This site has been so helpful for me, I just had to join. New Can Am owner as of July 2020!
So I want your $.02. I will be wrapping my '17 Can Am Daytona 500 next week when my 3m vinyl arrives. I'm stuck on how much of the F3 I want to wrap. Look at the mock up picture attached (sry, bad photoshop), and help me decide by voting in the poll! This will help me a lot. Thanks guys!
More yellow might add a bit of safety, but aside from that both look great. If you haven't decided, perhaps give yourself another couple of weeks before you go in?
2020 RT Limited in the ultra cool Deep Marsala Dark edition.
Baja Ron Anti-Sway Bar, LED reflectors, Lamonster USB Charger (and phone mount), Can-Am Low Windshield, X-Creen Tour Variable Windscreen Spoiler Blade, Power Commander, Dilithium powered Flux Capacitor (not yet fully functional). Maintained by Lou at Pirate Powersports.
Black is usually easier to keep clean than yellow. Yellow helps visibility. Too much yellow and cars will stop when you do waiting for the kids to get off.
Be Aware, when you go with wrapping things it's addictive, Personally I think less is more, I wrapped the rear fender in carbon, the kneepads in carbon, the frontspoiler (f3s) in Orange, and the top panels also in carbon.
Mine is except the spoiler, black black and did I mention black....
These spyders, are easy customizable. but I cannot tell you how to go about wrapping your vehicle, that is personal taste. but as stated in earlier reply's, Sky is the limit..
the funniest thing about this particular signature is that by the time you realise it doesn't say anything it's to late to stop reading it........
Spyder F3s 2019 All Black ( Named it: Brutus)
Carbon Items added, just for looks
Upgraded Shocks Trac-Tive, Rear hi/lo and rebound adjustable, with Hydraulic Pre-Load adjuster
fronts hi/lo and rebound adjustable, custom made by the Trac-Tive Guru's
Swaybar (Ron's)
Tyres Front Michelin Cross Climate+ 175/60-15
Rear, for 2022 still a Kenda, next Yokohama Advan Fleva 205/55R15
Exhaust Bone stock, with a RLS Cat- Delete
Custom ECU-Mapping, rewritten/adapted to my Ridingstyle
Pedalbox, Awesome Upgrade...
Black is usually easier to keep clean than yellow. Yellow helps visibility. Too much yellow and cars will stop when you do waiting for the kids to get off.
Haha!! Yeah I'm already too visually loud for my taste currently. Hopefully the yellow frunk and frame bars are good enough for visibility. Hope to catch you on the hwy! I'm in Central area as well. Cheers!
Piratezz Thanks for the tip mate. And also very accurate. My 3m doesn't even arrive until tomorrow, and I'm already thinking of other things to wrap other than my Can Am LOL. Can't wait' til my (lack of) vinyl wrapping skills prove to be my reality check tomorrow
it's trail and error, be sure to have enough wrapping material, as you shuck a whole lot in the bin. If you have the good stuff (3m, avery ) don't worrie bout wrinkels, you can take the foil off, and heat it gently with a heatgun, pull the wrap in the correct manner.
it straightens itself out, just as I said, be patient, and you will learn quickly.
There are tons of youtube vids, but they don't show the aggrevation, gheghghe.
It goes wrong in the beginning.. I have a shop in windowtinting, and windshieldreplacement, but I never dared to wrap a complete car or motorcycle for that matter.
Good luck, and post pictures when you are ready, seems to me you are never finished with a Spyder.
the funniest thing about this particular signature is that by the time you realise it doesn't say anything it's to late to stop reading it........
Spyder F3s 2019 All Black ( Named it: Brutus)
Carbon Items added, just for looks
Upgraded Shocks Trac-Tive, Rear hi/lo and rebound adjustable, with Hydraulic Pre-Load adjuster
fronts hi/lo and rebound adjustable, custom made by the Trac-Tive Guru's
Swaybar (Ron's)
Tyres Front Michelin Cross Climate+ 175/60-15
Rear, for 2022 still a Kenda, next Yokohama Advan Fleva 205/55R15
Exhaust Bone stock, with a RLS Cat- Delete
Custom ECU-Mapping, rewritten/adapted to my Ridingstyle
Pedalbox, Awesome Upgrade...
Wash and clean with alcohol real good.
Job success will depend on it and if there are curves beyond limit of how much vinyl can stretch, you will need primer.
Part like below will not stay without the primer.