Results 1 to 7 of 7
  1. #1
    Active Member
    Join Date
    Sep 2020
    Location
    Taxachussetts
    Posts
    51
    Spyder Garage
    0

    Default Cannonball or Comfort seat for F3L - anyone tried either?

    As the title says, looking at both of these seats as an alternative to the custom route. Does anyone have any experience with either of these seats on a F3 or F3L?
    thanks
    Joe

  2. #2
    Member
    Join Date
    Apr 2021
    Location
    Dawsonville, ga
    Posts
    22
    Spyder Garage
    0

    Default

    Same here. Thinking of adding Cannonball to F3-T build

  3. #3
    Very Active Member ARtraveler's Avatar
    Join Date
    Feb 2010
    Location
    Valley Springs, AR
    Posts
    41,274
    Spyder Garage
    8

    Default

    I purchased the Cannonball seat for my 2019 F3L. I chose Cannonball because I liked the quilted pattern. It is better than the OEM seat and I can go 150 miles without the bum falling off.

    I am "thinking" that the Cross Country may be a better choice.

    Currently Owned: 2019 F3 Limited, 2020 F3 Limited: SOLD BOTH LIMITEDS in October of 2023.

    Previously : 2008 GS-SM5 (silver), 2009 RS-SE5 (red), 2010 RT-S Premier Editon #474 (black) 2011 RT A&C SE5 (magnesium) 2014 RTS-SE6 (yellow)

    MY FINAL TALLY: 7 Spyders, 15 years, 205,500 miles

    IT HAS BEEN A LONG, WONDERFUL, AND FUN RIDE.
    2020 F3L , Magma Red

  4. #4
    Active Member
    Join Date
    Apr 2015
    Location
    Lodi WI
    Posts
    335
    Spyder Garage
    0

    Default

    I have a cannonball set for my F3L. I found the front to be about the same as the stock seat as I have changes back and forth a couple of times. The rear is an upgrade as it has a nice pocket for support over the stock. Let me know if you want to purchase my cannonball set from me. Thinking about 1/2 price as I'm leaning towards the Ultimate seat.
    Dennis pm me if interested

  5. #5
    Member
    Join Date
    Apr 2021
    Location
    Dawsonville, ga
    Posts
    22
    Spyder Garage
    0

    Default

    Quote Originally Posted by Dennis in Lodi View Post
    I have a cannonball set for my F3L. I found the front to be about the same as the stock seat as I have changes back and forth a couple of times. The rear is an upgrade as it has a nice pocket for support over the stock. Let me know if you want to purchase my cannonball set from me. Thinking about 1/2 price as I'm leaning towards the Ultimate seat.
    Dennis pm me if interested
    Thanks Dennis. Actually I changed my mind about the F3 and put a deposit down on an RT. But thanks anyway!

  6. #6
    Member
    Join Date
    Apr 2020
    Location
    Lucedale ms
    Posts
    2
    Spyder Garage
    0

    Default

    Does anyone know if the rider back rest will still fit a canon seat?

  7. #7
    Active Member
    Join Date
    Mar 2015
    Location
    Indianapolis, IN
    Posts
    445
    Spyder Garage
    3

    Default

    Quote Originally Posted by ChucknRoxann View Post
    Does anyone know if the rider back rest will still fit a canon seat?
    Dennis in Lodi had a Utopia rider backrest installed - the bracket actually cut the seat a little bit (have another friend who's stock seat was cut by the Utopia bracket as well). I bought Dennis' seat and repaired it for my friend. She has the Show Chrome / Big Bike Parts rider backrest - and it works just fine.
    -----
    Joshua
    2012 Victory Vision
    2016 Spyder F3S
    2019 Spyder RT Limited
    2016 F3S , Triple Black

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •