Page 2 of 2 FirstFirst 12
Results 26 to 41 of 41
  1. #26
    Active Member cruisinTX's Avatar
    Join Date
    Mar 2015
    Location
    Fritch, Tx
    Posts
    382
    Spyder Garage
    1

    Default

    OR; you could spend maybe $2 at a bicycle shop and get a 90 stem adapter and just leave it on all the time. Being made for bicycle tires they are rated for over 100psi. I've had one on our 2014 RT since the first week of owning it. Now a little over 7500 miles later--no problems whatever.
    Attached Images Attached Images

    Those who say " I can't" will always be right.
    2014 RT Limited , pewter (magnesium?)

  2. #27
    Active Member
    Join Date
    Dec 2020
    Location
    Hartwell, Ga
    Posts
    30
    Spyder Garage
    0

  3. #28
    Active Member Valkrocket's Avatar
    Join Date
    May 2018
    Location
    Murrells Inlet, SC
    Posts
    131
    Spyder Garage
    1

    Default

    How about using this. Minimal loss of air when removing. Screw off types lose more air. Heck, with 24" of extension you could sit in a chair and inflate. Good ol' Amazon.
    https://www.amazon.com/Show-Chrome-A...454698&sr=8-37
    71xDSrbLCQL._AC_SL1500_.jpg
    GLIDE-ON>>>>>>>>>>>>>>


    "Blue Belle" 2021 RTL Chrome in Petrol Blue
    2021 RTL Chrome , Petrol Blue

  4. #29
    Very Active Member
    Join Date
    Feb 2020
    Location
    N. Wilkesboro, NC
    Posts
    1,170
    Spyder Garage
    0

    Default

    Quote Originally Posted by Valkrocket View Post
    How about using this. Minimal loss of air when removing. Screw off types lose more air. Heck, with 24" of extension you could sit in a chair and inflate. Good ol' Amazon.
    https://www.amazon.com/Show-Chrome-A...454698&sr=8-37
    71xDSrbLCQL._AC_SL1500_.jpg
    That's a great idea but you still have to move the bike around until you get the valve stem in the right place.

  5. #30
    Very Active Member IdahoMtnSpyder's Avatar
    Join Date
    Jan 2014
    Location
    Idaho
    Posts
    7,869
    Spyder Garage
    1

    Default

    Quote Originally Posted by Valkrocket View Post
    How about using this. Minimal loss of air when removing. Screw off types lose more air. Heck, with 24" of extension you could sit in a chair and inflate. Good ol' Amazon.
    https://www.amazon.com/Show-Chrome-A...454698&sr=8-37
    A push-on chuck is a lot easier to get on the stem. Those kinds of chucks take a fair amount of finger strength to get secure on the stem.
    Last edited by Peter Aawen; 01-12-2021 at 02:03 PM. Reason: Fixed quote display

    2014 Copper RTS

    Tri-Axis bars, CB, BajaRon sway bar & shock adjusters, SpyderPop's Bumpskid, NBV peg brackets, LED headlights and modulator, Wolo trumpet air horns, trailer hitch, custom trailer harness, high mount turn signals, Custom Dynamics brake light, LED turn signal lights on mirrors, LED strip light for a dash light, garage door opener, LED lights in frunk, trunk, and saddlebags, RAM mounts and cradles for tablet (for GPS) and phone (for music), and Smooth Spyder belt tensioner.
    2014 RTS , Copper! (officially Cognac)

  6. #31
    Very Active Member jaherbst's Avatar
    Join Date
    Nov 2013
    Location
    Oro Valley Arizona
    Posts
    3,671
    Spyder Garage
    0

    Default

    RYOBI makes a nice small compressor with a built in gauge and a clamp on to valve stem. This works perfectly for all tires up to 125#.

    Jack
    All my life I wanted to be somebody, now I realize I should have been more specific.
    2019 Specialized E-Bike COMO 2.0
    2018 Jeep Grand Cherokee Overland
    2018 Tiffin Phaeton 37BH Motorhome
    2015 BMW R1200R LC
    2014 RTL SE6 Pearl White
    2012 RT-622 trailer viper red
    2014 Look 7x12 motorcycle trailer silver and black
    2011 Polaris Ranger green
    2013 GMC Yukon Denali XL silver oak
    2016 Can Am Maverick

  7. #32
    SpyderLovers Sponsor Motorcycledave's Avatar
    Join Date
    Jul 2012
    Location
    Linden, CA
    Posts
    3,755
    Spyder Garage
    0

    Default Simple fix

    Quote Originally Posted by BikerBob View Post
    Is there any way to install another add on to make getting air in the rear tire easier?
    Next time you have to replace the rear tire, do this, before removing the rear tire
    mark the wheel on the other side of where the current valve is, now 180 degrees
    from that valve drill a new hole for a new valve that is closer to the edge but not where
    the new valve will hit anything now install a new metal valve or rubber valve, Yes you will
    have 2 valves in the wheel it's no big thing and it works very well.Just be sure
    you put it across from the old valve stem so it don't cause any balance problems.

  8. #33
    Very Active Member RICZ's Avatar
    Join Date
    Feb 2019
    Location
    Portland, Oregon
    Posts
    1,797
    Spyder Garage
    1

    Default

    When I had car tires mounted on the front, I had them install longer valve stems. The made checking and adding air much easier. I don't know why BRP uses such short stems. Maybe they are two cents cheaper.
    Ours is a red, black and chrome 2017 F3 Limited. Bought new in 2/2019. The avatar is my first bike back in 1952, a Simplex Servi-Cycle. Photo taken at the Barber Museum.
    2017 F3 Limited , Red, Black & Chrome

  9. #34
    Active Member johnv50's Avatar
    Join Date
    Jun 2018
    Location
    Tonawanda, NY
    Posts
    124
    Spyder Garage
    0

    Default

    For those of you using the FOBO TPMS, what did you do to make their sending units fit on the short stems. I fond some short (1/2") extensions but was worried about stress to the rubber valves.

    thanks johnv
    USMC RETIRED

    BLUE KNIGHTS NYV

  10. #35
    Active Member EdMat's Avatar
    Join Date
    Apr 2019
    Location
    Clinton, MS
    Posts
    410
    Spyder Garage
    1

    Default

    Quote Originally Posted by johnv50 View Post
    For those of you using the FOBO TPMS, what did you do to make their sending units fit on the short stems. I fond some short (1/2") extensions but was worried about stress to the rubber valves.

    thanks johnv
    They seem to work fine on 2019 RT. Can't speak to the others but mine are pretty short. I do not use the supplied locks, can't see a need for them.
    2019 RT Limited , Phoenix Orange

  11. #36
    Very Active Member
    Join Date
    Feb 2020
    Location
    N. Wilkesboro, NC
    Posts
    1,170
    Spyder Garage
    0

    Default

    Quote Originally Posted by johnv50 View Post
    For those of you using the FOBO TPMS, what did you do to make their sending units fit on the short stems. I fond some short (1/2") extensions but was worried about stress to the rubber valves.

    thanks johnv
    They work just fine on my 2021 RT base. No issues, whatsoever.

  12. #37
    Ozzie Ozzie Ozzie Peter Aawen's Avatar
    Join Date
    Dec 2013
    Location
    Australia; Sth Aust, Adelaide Hills
    Posts
    4,980
    Spyder Garage
    0

    Default

    Quote Originally Posted by johnv50 View Post
    For those of you using the FOBO TPMS, what did you do to make their sending units fit on the short stems. I fond some short (1/2") extensions but was worried about stress to the rubber valves.

    thanks johnv
    I think that for some obscure/indecipherable reason, BRP used shorter valve stems on some of the F3's outta the box (2017?? ) and those were a bit tough to fit the FOBO senders onto!

    No biggie tho, when you toss the Kendas & get some proper tires fitted, they'll probably hafta take the valve stem out anyway, so just get the tire fitter to use the next longer length valve stem then - no worries after that!

    That said, the valve stem extensions won't be seriously stressing anything - and if they do cause issues, it'll just highlight that you already had a problem that needed fixing anyway!
    2013 RT Ltd Pearl White

  13. #38
    Very Active Member
    Join Date
    Aug 2014
    Location
    Northern Kalifornia
    Posts
    1,607
    Spyder Garage
    0

    Default

    Quote Originally Posted by MONK View Post
    They work just fine on my 2021 RT base. No issues, whatsoever.
    Work just fine on my 2014 RT also. No issues, whatsoever.

  14. #39
    Active Member redrazor's Avatar
    Join Date
    Mar 2020
    Location
    Martinez, CA
    Posts
    112
    Spyder Garage
    0

    Default

    I just ordered a pair of these 90 degree stems from Amazon supplier. Anxious to install. It's a huge pain to even check the rear tire pressure!

  15. #40
    Active Member redrazor's Avatar
    Join Date
    Mar 2020
    Location
    Martinez, CA
    Posts
    112
    Spyder Garage
    0

    Default

    90 degree brass stem was easy to install and makes Pressure Checks and adjustments sooo much easier. Best $$ spent in a while!
    I'll try to post a photo soon.
    Last edited by redrazor; 01-17-2021 at 02:49 PM. Reason: forgot to add photo

  16. #41
    Member
    Join Date
    Aug 2020
    Location
    California
    Posts
    13
    Spyder Garage
    0

    Default

    I used a clamp-on chuck for awhile. Getting it on was no problem, but taking it off was. Tended to get caught on the threads and released too much air in the process. Now I use a threaded chuck. I can reach the valve to screw it on for pretty much any wheel position. Losing air when unscrewing has not been an issue. My compressor has a psi setting, so it checks the pressure at the same time, adding air only if needed - two operations are no longer needed.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •