Results 1 to 5 of 5
  1. #1
    Active Member Spyder Hawk's Avatar
    Join Date
    Feb 2015
    Location
    California
    Posts
    121
    Spyder Garage
    0

    Default Does anybody know how to wire this - colored fog light switch?

    I am trying to replace the switch on my fog lights and the supplied wire diagram just doesn't make any sense to me. The simple off / on push button switch works but I wanted to be able to distinguish off from on a little simpler. I got this two color latching switch from Amazon but I can't get it to work. The diagram doesn't help because it seems backwards to me. Red is the negative and black is the positive on this switch for some reason. I got the switch to work but only one color which defeats the purpose of doing this. Can anyone offer some guidance?
    Attached Images Attached Images

  2. #2
    Active Member
    Join Date
    Aug 2020
    Location
    Poland
    Posts
    81
    Spyder Garage
    0

    Default

    I'm not sure I understand the problem.
    C is connected through switch to NC (cormally closed) or NO (normally opened).
    NC is always connected with 3 and NO with 2.

    Does this switch have LED lights in it, or LED will be connected by you? Having URL to amazon would help .
    2011 Spyder RT with some work to do

    https://www.spyderlovers.com/forums/...from-graveyard

  3. #3
    Active Member Spyder Hawk's Avatar
    Join Date
    Feb 2015
    Location
    California
    Posts
    121
    Spyder Garage
    0

    Default

    It has LEDs in it. All I have done so far, following the wire diagram, is blow out fuses, lol.

    https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

  4. #4
    Very Active Member
    Join Date
    Nov 2016
    Location
    Upstate NY
    Posts
    754
    Spyder Garage
    2

    Default

    The answer is in the schematic in this photo. 1(RED WIRE)- ground, C(white wire)- 12V+, 2(black wire)- LED +(connect to NC), 3(green wire)- empty, 4(grey wire)- connect to C(4 is not shown in schematic), NO(blue wire)-connect to light, NC(brown wire)- empty. 2 and 3 can be swapped between NC depending which color led you want lit.

    61P35fnA0-L._AC_SL1100_.jpg
    2021 Sea to Sky RT , Highland green

  5. #5
    Very Active Member
    Join Date
    Nov 2016
    Location
    Upstate NY
    Posts
    754
    Spyder Garage
    2

    Default

    RED wire - ground
    White wire - 12v+
    grey wire - connect to white wire(lights switch all the time)
    black wire - connect to blue wire(changes led color when switch pressed)
    blue wire - also connects to aux light(sends power to aux light)
    green wire empty
    brown wire empty
    2021 Sea to Sky RT , Highland green

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •