Results 1 to 4 of 4
  1. #1
    Active Member
    Join Date
    Sep 2017
    Location
    British Columbia
    Posts
    40
    Spyder Garage
    0

    Default Anyone got the Part # for O-Rings on Final Drive drain plug and level screw?

    Ok so for the life of me I cannot find which part number or the correct sealing washers (or O-Rings) that are used for the Final Drive drain plug and level screw.

    The parts book on-line shows and has the numbers for both Engine Oil drain plugs and also the Gear Box drain and level/fill screw, but for some reason, it does not have anything for the Final Drive! The shop manual talks about replacing the O-Ring/sealing rings so they must have them, yet the parts do not show them?

    Screen Shot 2020-12-20 at 4.12.06 PM.jpgScreen Shot 2020-12-20 at 4.16.26 PM.pngScreen Shot 2020-12-20 at 4.16.47 PM.pngScreen Shot 2020-12-20 at 4.13.38 PM.jpgScreen Shot 2020-12-20 at 4.12.54 PM.jpg
    2013 ST LTD; 2019 Ryker Rally

  2. #2
    Active Member ButterSmooth's Avatar
    Join Date
    Sep 2020
    Location
    Central Oregon
    Posts
    470
    Spyder Garage
    1

    Default

    The better question is to ask for the dimensions of the 'O' ring, so you can buy some from a more reasonable source. Unfortunately, I don't know the answer to either.
    Head in the game, eyes down the road... 2020RT
    Spyder Tryke Pylot
    2020 RT , Lamonster extender Petrol

  3. #3
    Very Active Member SportsterDoc's Avatar
    Join Date
    May 2020
    Location
    New Mexico
    Posts
    788
    Spyder Garage
    1

    Default

    I reused drain plug o-rings, so they are not on this list.
    It is possible that I reversed the part numbers for the copper and aluminum crush washers.

    The aluminum washers were found later at O'Reillys, for less than $1 each.

    Ryker parts & options.jpg

    Another forum member previously suggested BRP part number 219800486 for the 0-ring

    https://www.spyderlovers.com/forums/...ring-Re-usable

    Suggest you purchase from BajaRon
    The attached list was before I found his prices for filter/o-ring/washer kits...VERY good deals.
    23 Moto Guzzi V7-850 SE 23 Yamaha XT250 18 Yamaha Bolt R-Spec 22 Triumph Street Twin 20 CanAM Ryker 900 14 Honda CB1100 18 Yamaha XT250 16 Moto Guzzi V7 II 17 Yamaha TW200 12 Triumph Bonneville 02 Sportster 1200 Sport 03 Sportster 883 76 Honda CB750F 75 Honda CB360 70 Yamaha CT1 72 Yamaha CT2 72 Yamaha AT2/CT2 70 Honda SL350 70 Honda CL350 67 Honda CL160 67 Honda CB160 62 Honda CA110
    2020 900 , NGK 4218 iridium CR8EIX Matte black

  4. #4
    Active Member
    Join Date
    Sep 2017
    Location
    British Columbia
    Posts
    40
    Spyder Garage
    0

    Default

    I looked up the part for the 2020 Ryker Rally and they have it listed as an O ring for the final drive drain. For some reason they did not list it in the 2019 schematics/parts list. Can't imagine they would be different though. The part number is indeed 219800486. $10 . Nothing listed for the fill level plug besides the plug itself. Screen Shot 2020-12-21 at 8.14.26 PM.jpgScreen Shot 2020-12-21 at 8.21.41 PM.jpg
    2013 ST LTD; 2019 Ryker Rally

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •