|
-
 Garage door opener for 2020+ RT and RTL
Hey guys. I was searching YouTube and found a guy in the comments section who recommended this. I just bought one and it is on the way (I don't even own a Spyder yet). This should be just the ticket!
https://www.foxtrot4x4.com/collectio...36629147320485
OEM look and now I can open and close my garage door.
-
Very Active Member
 Originally Posted by ollicat
Hey guys. I was searching YouTube and found a guy in the comments section who recommended this. I just bought one and it is on the way (I don't even own a Spyder yet). This should be just the ticket!
I see they have them available with a switch that matches 2019 and earlier. Pretty pricey @ $90 but they sure look good!
2014 Copper RTS
Tri-Axis bars, CB, BajaRon sway bar & shock adjusters, SpyderPop's Bumpskid, NBV peg brackets, LED headlights and modulator, Wolo trumpet air horns, trailer hitch, custom trailer harness, high mount turn signals, Custom Dynamics brake light, LED turn signal lights on mirrors, LED strip light for a dash light, garage door opener, LED lights in frunk, trunk, and saddlebags, RAM mounts and cradles for tablet (for GPS) and phone (for music), and Smooth Spyder belt tensioner.
-
Active Member
I wish I saw this post before I installed an on/off rocker switch there. But, then again, my GDO is a Wayne Dalton and is not on the approved list of manufacturers for this remote, so I guess I feel a little better about missing out on this install.
Thank you for the post. 
GLIDE-ON>>>>>>>>>>>>>>
"Blue Belle" 2021 RTL Chrome in Petrol Blue
-
Very Active Member
Thank You for the post. I like your illustration of an installation.
I too have a Door Opener from a company that is not listed- Sommer.
I bought switch on Amazon and spare opener from the manufacturer.
Wired the opener to the switch and installed on the Spyder. Rather a fun project.
David C
2016 F3T
DIY Garage Door Opener & GPS Mount
Battery tender cable
Rear IPS Pack Rack
-
Very Active Member
I have this opener and really like it
4" Stubby antenna, Dual arm LEDs Fender LEDs, Back Rest, Luggage Rack, Run, Brake and Strobe for top case, Mirror LEDs,Back Off decal on mud flap, reciptal for Battery Tender and Heated Gear, mirror LEDs that stay on or work with blinkers, GPS, side bag red LEDs, Top cuff with Ram Ball phone holder And USB power, Top cuff with drink holder and passenger cup holder. Also grilles in front of radiators, also spyclops. Garmin 595 GPS, Freedom windshield. Also glove box console And trunk wrap in carbon fiber from wrap my spyder. BRP comfort seat. added garage opener with rocker switch in center console to match other switches. And I have added Elka stage 2 shocks.
-
This is a decent option for someone who wants a simple easy setup.
I'm a tinkerer. I wired my own solution up for less than $10 and my garage door opens when I'm in range and flash my high beams. ;-) I have 2 Spyder and a Victory Vision all wired this way.
-----
Joshua
2012 Victory Vision
2016 Spyder F3S
2019 Spyder RT Limited
-
Very Active Member
Originally Posted by Jdr00ejr
This is a decent option for someone who wants a simple easy setup.
I'm a tinkerer. I wired my own solution up for less than $10 and my garage door opens when I'm in range and flash my high beams. ;-) I have 2 Spyder and a Victory Vision all wired this way.
Would you be willing to share exactly how and the parts needed? I like this idea.
Thanks, Bob
-
Originally Posted by Bangorbob
Would you be willing to share exactly how and the parts needed? I like this idea.
Thanks, Bob
I'll need to pull the info together. I should have mentioned though the I made 4 of them at a time - which is what allowed it to be about $10 a piece. Some of the items I bought in multiples.
Also - what Spyder are you riding? That will matter.
-----
Joshua
2012 Victory Vision
2016 Spyder F3S
2019 Spyder RT Limited
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
Reply With Quote
