-
Survey on TIRES
I got a email from brp:
Thank you for being part of the Can-Am family. You are invited to participate in this survey because you bought a Can-Am Spyder RT LIMITED. BRP is interested in how you choose your Spyder replacement tires. This is your chance to let us know what we can do to make your Can-Am Spyder experience better.
Participation is completely voluntary, and your answers are treated according to our confidentiality and privacy policy.
This survey will take about 5 minutes of your time.
Thank you.
-
I got the same one today as well.
-
I took the survey just now..Wondering what is in the future for tires for the Spyder??
-
Very Active Member
I got mine the other day. It would be nice if BRP finally would admit that auto tires are better than the Kendas.
2020 F3 Ltd
Spyderpops Bumpskid
Spyderpops Brake/Run/Turn Signal LED's
Lamonster Garage LED Fog Lights and Headlights
2013 ST-S retired 1/9/16 at 25,061 miles
2015 F3S sold at 77,565 miles.
-
If nothing else, it shows that BRP is interested. I got no request but maybe I will get one. What I would like to see is dealers mount the tire of Spyder owner's choice, not sure that will ever happen. If BRP would come off the "Kenda thing', maybe the dealers would be more inclined to follow vehicle owner's choice.
-
Very Active Member
Got mine today, leveled the barrel and fired a long burst at them about the Crapendas.
Artillery lends dignity to what would
otherwise be a vulgar brawl.
******************************
Cognac 2014 RT-S
-
Originally Posted by trikermutha
I got a email from brp:
Thank you for being part of the Can-Am family. You are invited to participate in this survey because you bought a Can-Am Spyder RT LIMITED. BRP is interested in how you choose your Spyder replacement tires. This is your chance to let us know what we can do to make your Can-Am Spyder experience better.
Participation is completely voluntary, and your answers are treated according to our confidentiality and privacy policy.
This survey will take about 5 minutes of your time.
Thank you.
Hmmmmmmmmm.....thanks for posting.
-
Very Active Member
How do we get a look at this survey?
-
Very Active Member
-
Active Member
Got mine today and completed the survey. Told them the stock tires were junk, why I replaced them with car tires. And last question. Mentioned that they should get they’re dealer network in order, good dealers are far and few between. And that it was the main reason that I would not be purchasing another Spyder when this one bites the dust.
-
Very Active Member
survey ???
I didn't get one, IMHO BRP and Kenda parting ways is NOT going to happen. It makes zero sense Financially for them to do so, so I won't hold my breath. Since 2010 the " windshield Arm " has probably had the highest " failure " rate of all the Spyder parts .... How did BRP fix this ....they finally allowed folks to but the ARM separately - the same junky part that they put on the RT's in the first place. All they had to do was to change the Casting mold, ie. stop removing all the material from the arm , which dramatically Weakens that part. .... good luck .... Mike
-
Didn't receive one as of yet.
-
Originally Posted by Cobwebs
How do we get a look at this survey?
You need a invite from the survey to see it
-
-
Very Active Member
I sure hope I get one. I have a mouth full for them. Tom
Baloo is my name. Spyders are my game. Well, it's a doo-bah-dee-doo, yes, it's a doo-bah-dee-doo, I mean a doo-bee, doo-bee, doo-bee, doo-bee, doo-bee-dee-doo. And, well, now. Ha ha! What have we here?
2020 Petrol Blue Metallic RTL
-
I am sure many will give then there thoughts.
-
SpyderLovers Sponsor
Originally Posted by BLUEKNIGHT911
I didn't get one, IMHO BRP and Kenda parting ways is NOT going to happen. It makes zero sense Financially for them to do so, so I won't hold my breath. Since 2010 the " windshield Arm " has probably had the highest " failure " rate of all the Spyder parts .... How did BRP fix this ....they finally allowed folks to but the ARM separately - the same junky part that they put on the RT's in the first place. All they had to do was to change the Casting mold, ie. stop removing all the material from the arm , which dramatically Weakens that part. .... good luck .... Mike
They don't have to part ways. Kenda can make a decent tire. They just don't for the Spyder/Ryker. I suspect it has more to do with BRP's specs. than it does with Kenda. But there is no way to know.
Shop Ph: 423-609-7588 (M-F, 8-5, Eastern Time)
Only SLOW people have to leave on time...
-
Very Active Member
I don't care if they part ways. Just stop making a fuss if a dealer mounts something else.
Happy TRAils/NSD
Paul
2012 RT L
AMA 25 years Life Member
TRA
PGR
Rhino Riders Plate #83
Venturers #78
TOI
-
Very Active Member
Originally Posted by Tango
I sure hope I get one. I have a mouth full for them. Tom
You and me both !!!
If it ain't broke, don't break it.
IBA #47122
2020 RT Limited Asphalt Grey
-
Very Active Member
The only survey I got was for my purchase dealer service department. It was so simple and limited that I feel sure it will be of no actual use.
Would love to get one on the tires if it's more than 4 questions and allows you to make comments.
-
Originally Posted by Jheck
...I would not be purchasing another Spyder when this one bites the dust.
IMHO, I would NOT mention that you won't purchase another Can Am product. If you tell them you're done w/their product, they have no incentive to make any changes. If/when I get the survey, I'll let them know I'm on my 2nd Spyder. I want them to think that I want to continue to support them.
-
Active Member
I got mine and filled It out yesterday, I gave them a ear full..
2013 Viper Red RT S-SE5 All 48 states on a Gold Wing now I'm working on getting all on a
-
Very Active Member
-
-
Very Active Member
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|