Results 1 to 2 of 2
  1. #1
    Very Active Member RayBJ's Avatar
    Join Date
    Sep 2020
    Location
    Middletown, NJ
    Posts
    1,319
    Spyder Garage
    1

    Default My DIY RT 2020 Aux light

    I wanted to add an LED DRL below the headlights and BRP sells a plug & play strip for $265.
    https://can-am.brp.com/on-road/us/en...ary-light.html

    Soooo,
    I went to amazon and found these for $22. a pair. https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

    Easy install -
    1 - remove the trim plate (2 screws)
    2 - unplug the un-used connector from the back of the trim plate
    3 - drill hole in center of the trim plate to pass LED wires through
    4 - align LED strip on trim plate and drill mounting holes
    5 - mount the LED strip to trim plate
    6 - tap (I use posi-taps) into the wires of the unused connector (black to black, red to colored)
    7 - test by starting engine (LEDs should be on with headlights)
    8 - replace trim plate w/LED

    Bonus: you have a spare you can use elsewhere!
    Attached Images Attached Images
    '20 Spyder RT: Bajaron swaybar. Vredestein tires, Pedal Commander, Elka front shocks, GPS/USB/12V handlebar mount, Heli-Bars, Radar Detector, KOTT grills & vents, Shad top case, chin & DRL LEDs.
    2020 RT base , Chalk White

  2. #2
    Very Active Member
    Join Date
    Oct 2016
    Location
    Sebring, FL
    Posts
    1,704
    Spyder Garage
    0

    Default

    Oh yeah, I got two in the box, so I will keep one for a spare or a whatever, one of the easiest mods I've ever done. Saved many dollars over BRP, I love doing that.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •