Front sprocket cost R and R???

[Lew L]

How much do dealers charge to replace the front sprocket on an F-3?????? On a recent Battle Born Spyders day ryde a member had her front sprocket fail. Job cost her over $600 These things must be made of cheeze. But she is smart and had AAA do the tow.
4 hours labor seems excessive and the dealer should of had one or two ( they take up sooooo much room) in stock.

Lew L

[RICZ]

I just did and R&R for preventative maintenance. This was my first time doing that, so I was being methodical (aka slow) yet it took but a half hour. An RT will take longer to R&R panels, but never 4 hours. That's another reason I do my own wrenching.
The pulley costs about $100 and the bolt is under $11. She got had.

[Lew L]

Thanks RICZ,
I really thought 4 hours was way to much on an F-3.

[ButterSmooth]

...
The pulley costs about $100 and the bolt is under $11. She got had.

Some dealer's charges are usury. My local dealer quoted $381 to swap handlebars on my 2020RT -- that's about $1000 per hour.

The (unverified) part number for the new 'whistle reducing' pulley is #219800509, provided by mrwog.

[WisconsinDavid]

Is the pulley as much of an issue on the older RS models? I still am bopping around on a '10. It seems it is new models, but that may just because most on here have moved on beyond the RS.

[jiffy]

Flat rate time for the front sprocket 0.5 hr.

[BLUEKNIGHT911]

Is the pulley as much of an issue on the older RS models? I still am bopping around on a '10. It seems it is new models, but that may just because most on here have moved on beyond the RS.

NO .... since 2012 ( my finding this site ) I have read almost all the posts/ threads here and to my recollection there have very, very few reports for the V-twins ( can't remember any ) ..... this issue first arose with the F-3's ...... I have 56,000+ mi. on my RT and so far all OK ..... good luck .... Mike