2021 handlebar riser

[Papa103]

Does anyone know if the adjustable handle bars @$300 are the same as the adjustable riser on the new sea to sea edition. If so do you need any new cables or wire extensions to add to a 2021 RTL?

[Joel The Biker]

It is the same but it is not standard on the sea to sky edition. They were only demonstrating the new accessory in the video.

[troop]

And .. If they're for 2020+ RT's, shouldn't they work on the F3 models? They're not listed as an available accessory on Can-Am's website for F3's

[MONK]

And .. If they're for 2020+ RT's, shouldn't they work on the F3 models? They're not listed as an available accessory on Can-Am's website for F3's

I see no reason why it shouldn't work on F3s. The entire handlebar "system" is the same for the F3s and 2020+ RTs. Personally, I wouldn't pay $300 for an adjustable riser unless there were 2 different people riding the same machine and they were of vastly different heights. I think I'd rather spend $120 for one of Lamonts risers and call it good.

[ThreeWheels]

I'm a big proponent of the HeliBars. I know, at $600, they're twice the money of BRP, and 6 times the cost of the fixed BRP bars.
Still, they're infinitely adjustable including wrist angle.
It only hurts once.

Just my opinion, I know for a fact others don't share it.

[JP58]

The adjustable riser will go up more than back. You might get 1" pullback all the way up. New bars will give more pull back.

[Papa103]

The adjustable riser will go up more than back. You might get 1" pullback all the way up. New bars will give more pull back.

Thats a good point, I would like to have the bars closer to me also. I went thru this on my Harley and ended up with the Helibars because they were so adjustible. I was hoping the adjustable riser would be able to be rotated back toward the driver when installed. They must bolt on to a fixed flange not a round bar?

[JP58]

Now the ryker is all pullback. That one adjusts straight forward and back. That is how brp should have made it for the RT & F3. You can get the height you need by rotating the bars up and down.