Results 1 to 4 of 4
  1. #1
    Member
    Join Date
    Oct 2020
    Location
    Arkansas
    Posts
    26
    Spyder Garage
    0

    Default air horn for 2018 F3T

    Has anyone replaced the stock horn with a mini air horn? If so was it as simple as connecting 2 wires?

  2. #2
    Very Active Member
    Join Date
    Sep 2020
    Location
    Platte City, MO
    Posts
    595
    Spyder Garage
    0

    Default

    You could try that but consider the fact that the air compressor for the air horns will draw considerably more current that your present
    OEM horn. It might work for a short blast, but more than that may cause issues with the horn button, or the wires. A much wiser choice
    would be to wire in a relay, and not take any chances.
    Peggy and Howard

    Hers: 2013 Spyder ST-S SM5

    His: 1999 Honda VFR Interceptor

  3. #3
    Member
    Join Date
    Sep 2020
    Location
    Orlando, Florida
    Posts
    12
    Spyder Garage
    0

    Default

    Just go into the F3 maintenance section and search the forum for air horn. You'll get a couple of pages of how to on air horn install.

  4. #4
    Very Active Member Rattlebars's Avatar
    Join Date
    Mar 2017
    Location
    Girard OH (summer) Greenville SC (winter)
    Posts
    877
    Spyder Garage
    1

    Default

    The horn button completes the ground, the hot +12v is always hot even if the key is off.

    basic-horn-relay.gif
    to see my 2016 F3-T and many how to's
    2016 F3-T SE6 Roadster , Extended brake pedal for which I drilled out the brake rod yolk to lower it and added spacers to lift it slightly Black/Grey

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •