Drink holder options on a 2021 RT LTD?

[bluewoo]

Well now I need to see about a new drink holder, my revco doesn't seem to be high enough now vs the 2018.

Any suggestions???

[Stache]

https://www.drink2go.com/

I have the Spyder2go and drink2go pair. The Spyder2go is a one bolt mount to the left grip, and the drink2go clamps to the rear handgrip.

Works well for me

[BeRight]

I like the ram ball self leveling cup holder - haven't purchased one yet for RT - loved it on my F3. They range from $19 up based on mounting.

[vrich3733]

https://www.drink2go.com/

I have the Spyder2go and drink2go pair. The Spyder2go is a one bolt mount to the left grip, and the drink2go clamps to the rear handgrip.

Works well for me

Same here on a 2020 RTL but does yours hit the dash at full right turn?

[Stache]

Same here on a 2020 RTL but does yours hit the dash at full right turn?

Yes, but I’ve checked angles with it on and off. Not losing significant steering, especially since I only go to the limit in slow speed manoeuvre like parking.

I allow for it, and don’t jam it to the stop

[jcthorne]

DO NOT mount drink holders to the back of the handlebar control cluster. You will be replacing the cluster and its a very expensive repair. Those screws go into a small brass insert that is just pressed into the plastic housing. They cannot support the weight of a drink bouncing down the road. We have had to replace several of these for customers that were duped into purchasing this faulty design product.

[Fatcycledaddy]

https://www.drink2go.com/

I have the Spyder2go and drink2go pair. The Spyder2go is a one bolt mount to the left grip, and the drink2go clamps to the rear handgrip.

Works well for me

mine work perfect. I have 2 of the clamp on style and clamped it to the handle bars, and to the grab rail for the passenger.

[MONK]

http://www.lamonstergarage.com/can-a...lamonster-ips/

Best and IMHO the ONLY suitable solution if you want a drink on your handlebars (F3 and 2020+ RT).

[bluewoo]

Thanks for all the advice everybody! I ended up getting a RAM mount $25.00 clamp on style and will see how it holds up. I have a local motorcycle accessory shop that had it.

RAM-Mounts-53775-GPS-Accessory-img3.jpg

[davev1pa]

I have drink 2go on both RTs left cluster....dang. Would it help if use loctite? Or just get them outta there? I really like them but replacing a cluster doesnt sound like fun or cheap.

[bluewoo]

I have drink 2go on both RTs left cluster....dang. Would it help if use loctite? Or just get them outta there? I really like them but replacing a cluster doesnt sound like fun or cheap.

Not sure what your asking davev1pa? The type I had on the 2018 RTL I had on the right handle bar cluster, But I found out it wont clear the speak covers on the 2021 model so I got this pretty cheap and it benn working great.

[Peter Aawen]

DO NOT mount drink holders to the back of the handlebar control cluster. You will be replacing the cluster and its a very expensive repair. Those screws go into a small brass insert that is just pressed into the plastic housing. They cannot support the weight of a drink bouncing down the road. We have had to replace several of these for customers that were duped into purchasing this faulty design product.

I have drink 2go on both RTs left cluster....dang. Would it help if use loctite? Or just get them outta there? I really like them but replacing a cluster doesnt sound like fun or cheap.

See the BOLD bits!! Loctite WILL NOT help at all!

Bluewoo's 'Clamp On' style units are much less damaging!

[jcthorne]

loctite will not help. Take them off before they damage the cluster. Its a defective design.