-
Very Active Member
Drink holder options on a 2021 RT LTD?
Well now I need to see about a new drink holder, my revco doesn't seem to be high enough now vs the 2018.
Any suggestions???
-
Active Member
https://www.drink2go.com/
I have the Spyder2go and drink2go pair. The Spyder2go is a one bolt mount to the left grip, and the drink2go clamps to the rear handgrip.
Works well for me
MWO (Ret'd) SJ Barnes
‘20 RTL Stone Grey
named Britannia in honour of EE Doc Smith’s
Grey Lensman’s ship.
Farkles:
Bestem Carplay
canamsypderaccessories hitch and wiring harness,
showchrome trunk rack,
12v AND dual USB direct to battery in the frunk,
dual USB switched in the blank console switch spot (parasites the power off the seat heater switch),
frunk lid organizer,
trunk organizer,
showchrome rider backrest,
ryder and passenger cup holders,
ram mount for the iPad mini I use for GPS
quadlock phone mount
Nautilus horn
Data blocker on the glove box USB
Big Bike Parts highway pegs
Spyderzone dash pouch
Convex mirrors
‘20 Ryker 900 (my wife’s ryde)
Farkles
Slingmods fwd/rev ‘suicide shifter’
frunk organizer
dual horn
Max mount
Rear seat with tall back rest (not mounted)
Ryder backrest (not mounted)
Side bag
Top bag
top bag makes a good backrest. Will swap on the rear seat if she ever wants to 2up
-
I like the ram ball self leveling cup holder - haven't purchased one yet for RT - loved it on my F3. They range from $19 up based on mounting.
2020 RT Ride Frequent Stay Safe
Aftermarket Aux Light, GPS mounting/wiring, Lamonster Garage Mirror Lock, Lamonster Garage Belt Tensioner
Backrest Home Brew Mod
2008 RS from 2008 through 4/2015, 2015 F3-S from 4/2015 through 9/2020
-
Originally Posted by Stache
https://www.drink2go.com/
I have the Spyder2go and drink2go pair. The Spyder2go is a one bolt mount to the left grip, and the drink2go clamps to the rear handgrip.
Works well for me
Same here on a 2020 RTL but does yours hit the dash at full right turn?
-
Active Member
Originally Posted by vrich3733
Same here on a 2020 RTL but does yours hit the dash at full right turn?
Yes, but I’ve checked angles with it on and off. Not losing significant steering, especially since I only go to the limit in slow speed manoeuvre like parking.
I allow for it, and don’t jam it to the stop
MWO (Ret'd) SJ Barnes
‘20 RTL Stone Grey
named Britannia in honour of EE Doc Smith’s
Grey Lensman’s ship.
Farkles:
Bestem Carplay
canamsypderaccessories hitch and wiring harness,
showchrome trunk rack,
12v AND dual USB direct to battery in the frunk,
dual USB switched in the blank console switch spot (parasites the power off the seat heater switch),
frunk lid organizer,
trunk organizer,
showchrome rider backrest,
ryder and passenger cup holders,
ram mount for the iPad mini I use for GPS
quadlock phone mount
Nautilus horn
Data blocker on the glove box USB
Big Bike Parts highway pegs
Spyderzone dash pouch
Convex mirrors
‘20 Ryker 900 (my wife’s ryde)
Farkles
Slingmods fwd/rev ‘suicide shifter’
frunk organizer
dual horn
Max mount
Rear seat with tall back rest (not mounted)
Ryder backrest (not mounted)
Side bag
Top bag
top bag makes a good backrest. Will swap on the rear seat if she ever wants to 2up
-
Very Active Member
DO NOT mount drink holders to the back of the handlebar control cluster. You will be replacing the cluster and its a very expensive repair. Those screws go into a small brass insert that is just pressed into the plastic housing. They cannot support the weight of a drink bouncing down the road. We have had to replace several of these for customers that were duped into purchasing this faulty design product.
-
Very Active Member
Originally Posted by Stache
https://www.drink2go.com/
I have the Spyder2go and drink2go pair. The Spyder2go is a one bolt mount to the left grip, and the drink2go clamps to the rear handgrip.
Works well for me
mine work perfect. I have 2 of the clamp on style and clamped it to the handle bars, and to the grab rail for the passenger.
-
http://www.lamonstergarage.com/can-a...lamonster-ips/
Best and IMHO the ONLY suitable solution if you want a drink on your handlebars (F3 and 2020+ RT).
-
Very Active Member
Thanks for all the advice everybody! I ended up getting a RAM mount $25.00 clamp on style and will see how it holds up. I have a local motorcycle accessory shop that had it.
RAM-Mounts-53775-GPS-Accessory-img3.jpg
-
I have drink 2go on both RTs left cluster....dang. Would it help if use loctite? Or just get them outta there? I really like them but replacing a cluster doesnt sound like fun or cheap.
-
Very Active Member
Originally Posted by davev1pa
I have drink 2go on both RTs left cluster....dang. Would it help if use loctite? Or just get them outta there? I really like them but replacing a cluster doesnt sound like fun or cheap.
Not sure what your asking davev1pa? The type I had on the 2018 RTL I had on the right handle bar cluster, But I found out it wont clear the speak covers on the 2021 model so I got this pretty cheap and it benn working great.
-
Ozzie Ozzie Ozzie
Originally Posted by jcthorne
DO NOT mount drink holders to the back of the handlebar control cluster. You will be replacing the cluster and its a very expensive repair. Those screws go into a small brass insert that is just pressed into the plastic housing. They cannot support the weight of a drink bouncing down the road. We have had to replace several of these for customers that were duped into purchasing this faulty design product.
Originally Posted by davev1pa
I have drink 2go on both RTs left cluster....dang. Would it help if use loctite? Or just get them outta there? I really like them but replacing a cluster doesnt sound like fun or cheap.
See the BOLD bits!! Loctite WILL NOT help at all!
Bluewoo's 'Clamp On' style units are much less damaging!
2013 RT Ltd Pearl White
Ryde More, Worry Less!
-
Very Active Member
loctite will not help. Take them off before they damage the cluster. Its a defective design.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|