Results 1 to 6 of 6
  1. #1
    Member
    Join Date
    May 2020
    Location
    usa
    Posts
    7
    Spyder Garage
    0

    Default Trailer wiring 2014 ST - how to access it?

    Question trying to find out easy way / access to find connector under seat on a 2014 ST limited.
    Not sure if I need to remove side bag holders and panels or if there is easier way
    Attached Images Attached Images

  2. #2
    Very Active Member billybovine's Avatar
    Join Date
    Jul 2011
    Location
    Mitchell, Ontario, Canada
    Posts
    6,263
    Spyder Garage
    0

    Default

    The rear bottom tail pan needs to come off. I think one of the side panels too. It's been a few years. So then the saddle bag mounting frames half to come off. That's easy enough. Give the 3 mounting bolts a half turn with the Givi tool, that came with your Spyder new, and they come right off. Then the front bottom mount brackets have to come off. One nut each. Then remove the other screws and the pan comes off. If you can find the connector from there. Good, but I still think one of the sides has to come off.

    2018 F3 LIMITED

  3. #3
    Member
    Join Date
    May 2020
    Location
    usa
    Posts
    7
    Spyder Garage
    0

    Default

    Thanks, the rear bottom pan is that the cover above the rear wheel? Like in second picture I pulled panel down.

  4. #4
    Very Active Member Haze's Avatar
    Join Date
    Oct 2015
    Location
    Lynden, WA
    Posts
    1,214
    Spyder Garage
    0

    Default

    Here is the OEM Hitch instruction.
    Hitch Installation.docx
    Note: P. 13 to P. 16.
    David C
    2016 F3T
    DIY Garage Door Opener & GPS Mount
    Battery tender cable
    Rear IPS Pack Rack



  5. #5
    Very Active Member billybovine's Avatar
    Join Date
    Jul 2011
    Location
    Mitchell, Ontario, Canada
    Posts
    6,263
    Spyder Garage
    0

    Default

    Quote Originally Posted by motorrijden View Post
    Thanks, the rear bottom pan is that the cover above the rear wheel? Like in second picture I pulled panel down.
    That's it. But BRP calls it the lower tail cover. That's in the install instructions that Haze linked.

    2018 F3 LIMITED

  6. #6
    Member
    Join Date
    May 2020
    Location
    usa
    Posts
    7
    Spyder Garage
    0

    Default

    Awesome thanks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •