-
Audio connections on 2014 RT-S
Hi everyone
I have recently changed out my OEM speakers and now want to add some sort of amplifier. Can anyone tell me where the radio module is located and what type if connectors it has in order to add an amplifier to the system?
Richard
-
under the back right passenger hand rail. That is where I had to plug in the cable to integrate my bluetooth adapter with the audio system.
-
Thanks for the responce but that's not what I am looking to do. I am trying to add an amplifier to boost the volume on the existing speakers
-
I understand, but I believe that the module I plugged into was the radio module and not just an access port. square box held in place by 4 screws, has an antenna cable coming out of it that connects to the radio antenna.
-
Very Active Member
Originally Posted by Richard Budden
Thanks for the responce but that's not what I am looking to do. I am trying to add an amplifier to boost the volume on the existing speakers
There are no line level outputs from the radio module. You'll have to use an amplifier with speaker inputs. You can put the amp anywhere between the radio and speakers by splicing it into the speaker wires wherever works for you. There's not a lot of room under the tupperware. You may have to put it into the trunk or frunk.
2014 Copper RTS
Tri-Axis bars, CB, BajaRon sway bar & shock adjusters, SpyderPop's Bumpskid, NBV peg brackets, LED headlights and modulator, Wolo trumpet air horns, trailer hitch, custom trailer harness, high mount turn signals, Custom Dynamics brake light, LED turn signal lights on mirrors, LED strip light for a dash light, garage door opener, LED lights in frunk, trunk, and saddlebags, RAM mounts and cradles for tablet (for GPS) and phone (for music), and Smooth Spyder belt tensioner.
-
Thanks for the info. Based on what you're saying do you know where I can access the four speaker wires in the same location? It would be easy to tap into four of them if I can source them all in the same spot.
-
Very Active Member
Originally Posted by Richard Budden
Thanks for the info. Based on what you're saying do you know where I can access the four speaker wires in the same location? It would be easy to tap into four of them if I can source them all in the same spot.
Right off the bat I would say the most accessible location is at the audio unit under the passenger seat right side.
2014 Copper RTS
Tri-Axis bars, CB, BajaRon sway bar & shock adjusters, SpyderPop's Bumpskid, NBV peg brackets, LED headlights and modulator, Wolo trumpet air horns, trailer hitch, custom trailer harness, high mount turn signals, Custom Dynamics brake light, LED turn signal lights on mirrors, LED strip light for a dash light, garage door opener, LED lights in frunk, trunk, and saddlebags, RAM mounts and cradles for tablet (for GPS) and phone (for music), and Smooth Spyder belt tensioner.
-
Thanks for the info. I had a quick look. Where would it be located with reference to the air ride valve?
-
to get to the radio/audio unit, you must remove the right side passenger hand rail (grab bar). All the wires are threaded thru areas covered by body panels.
-
Originally Posted by Richard Budden
Thanks for the info. I had a quick look. Where would it be located with reference to the air ride valve?
It will be within inches of the air valve. You have to remove panels to SEE the radio module, you have to remove even more panels to access it and its wiring.
HER ride:
2017 RT-S SE6 Pearl White
My rides:
2000 Honda GL1500SE
1980 Suzuki GS850G
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|