OK, before someone flames me for not searching, I did look and the most recent info I found was 4 years old. I have to assume something has changed as that said the 'radio' did not have Bluetooth capabilities. I'm pretty sure the 2020 does as the settings are there to 'Add Helmet.' However, my F3 audio does not recognize my Sena. Any help out there?
2020 F3L; gone but not forgotten are all the good miles!
I have a2019 F3L,two Sena SM10, they work fine.
May I suggest doing a Sena reset of unit.
Have you updated the Sena?
Use the Sena phone pairing for the Can Am to find.
Make sure the Spyder Audio is fully booted up before trying pairing.
SM10 is a BT dongle that is hard wired to the radio so you can get radio audio in your headset. See picture below. So there is no need for one of those on a 2020 F3L. So I am guessing that you are confused and are talking about the your Sena helmet headset. Which may be a SMH10 or a S10 model. That is all the Sena headsets that I can remember with 10 in the model name. There may be more. So yes your headset should pair up just fine. Clear all your old pairings on your headset first then try again. If that does not work let us know and we will come up with more ideas.
Pairing a Sena SM10 with F3 Ltd audio
Reply With Quote
