Results 1 to 3 of 3
  1. #1
    Member perry s's Avatar
    Join Date
    Apr 2016
    Location
    hamilton ontario
    Posts
    1
    Spyder Garage
    0

    Default no power, battery OK, what next?

    turn on key no power tested battery 12v on tester what do i check next 2008 sm5 perry

  2. #2
    Very Active Member GOZFST's Avatar
    Join Date
    Oct 2014
    Location
    SD &AZ
    Posts
    544
    Spyder Garage
    0

    Default

    When you tested the battery was it when you were trying to start it or just at rest? At rest voltage should be more than 12v. How old is the battery? Try doing a load test on it and check the battery connections.Good luck.
    Bob S

  3. #3
    Very Active Member Lew L's Avatar
    Join Date
    Mar 2015
    Location
    forrest above Reno, Nv
    Posts
    3,630
    Spyder Garage
    1

    Default

    This is what happened to me today :

    Filled up fuel at the local station. Went to start it and no go. Is it my time for problems???? NO- after pushing a few buttons ----- I touched the KILL SWITCH and it started right up.Must have nudged when getting off the for fueling. Only did this once before on a trip with my beloved on the 900F.
    Lew L
    Kaos----- Gone but not forgotten.

    2014 RTS in Circuit Yellow, farkle-ing addiction down to once every few months. ECU FLASH IS GREAT.
    2014 RTS , Circuit Yellow

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •