-
Active Member
Interesting Article about Cornering....Basic Stuff, but Good Info...
So here is a link from Motorcyclist Magazine if anyone cares to look through and read it. It's about 4-5 minutes of your time...
https://www.motorcyclistonline.com/h...orSBoGZH-qfNJp
-
Very Active Member
-
Well there are some that will disagree with that concept and argue that delayed entry is better method.
https://youtu.be/RQ0Z5FfxxBE
-
Very Active Member
Originally Posted by triplethreat
Thanks .... good info , but remember they are using a TWO wheeler. Spyders are really closer to CARS then Mtc's ..... jmho ... Mike
-
Active Member
Originally Posted by Beaudog
HUH....did you even read the article? Maybe need to check it out again!
-
Active Member
Originally Posted by BLUEKNIGHT911
Thanks .... good info , but remember they are using a TWO wheeler. Spyders are really closer to CARS then Mtc's ..... jmho ... Mike
I understand that the article is about two wheels, but the very same concept can and should be applied to three wheels....a.k.a. the Spyders. Granted, on a Spyder you don't have as much room for moving around the "lane" as a two wheeler, but the concept is exactly the same results....you are "straightening" out the corner....just not quite as much as with two wheels.
-
Very Active Member
Originally Posted by triplethreat
I understand that the article is about two wheels, but the very same concept can and should be applied to three wheels....a.k.a. the Spyders. Granted, on a Spyder you don't have as much room for moving around the "lane" as a two wheeler, but the concept is exactly the same results....you are "straightening" out the corner....just not quite as much as with two wheels.
Basically, I agreed with you, and in an earlier post I did ( maybe on the other thread ) I said I do what was said in the LINKED article .........Mike ....
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|